When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
ive done some searching but cant find an answer. i have a 95 1500 with a 46rh that needs replaced. the junkyard sold me the only transmission they have and it turns out its a 46re. is it possible to put the rh valve body and pan to convert to hydraulic or are the valve bodies completely different just trying to find a way around returning this transmission if i can
I believe you can make the RE to RH just by swapping the valvebodies (and probably the separator plate). But then there's a wiring harness. RH needs only three wires, whereas RE has some more, 8 IIRC, so the connector may be different size.
i know, for the rh in the truck the wires go straight up through the same hole as the re 8pin. just wasnt sure if both valve bodies fit both transmission