When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Ok so I unplugged the front o2 sensor and it seemed like it ran better but still died but alot smoother it died at 172° I'll try to give a link to the video I took of the scanner to show what's all happening hope it helps.
Is it just me or does it sound like there is some hissing coming in at 5:19 right before it starts to stumble ? Try unplugging the EVAP purge solenoid and see if that makes a difference.
Is it just me or does it sound like there is some hissing coming in at 5:19 right before it starts to stumble ? Try unplugging the EVAP purge solenoid and see if that makes a difference.
It does kinda sound like it I can't remember if that was coming from the truck or cars driving by but it didn't sound like a car drove by so I will unplug it and see if that will do anything, now should I replug in my front o2 or leave it unpluged (I'm assuming replug it back in)
Is it just me or does it sound like there is some hissing coming in at 5:19 right before it starts to stumble ? Try unplugging the EVAP purge solenoid and see if that makes a difference.
If your talking about what I think you talking about then the evap purge solenoid is already unplugged and I can't find a plug for it