1997 Dodge Ram 1500 Low Pressure Service port
#1
1997 Dodge Ram 1500 Low Pressure Service port
I am replacing the o-rings and Schrader valves in my AC system. I am having a hard time figuring out how to do this on the low pressure port. There does not seem to be a removal Schrader valve. You can remove the fitting it sits in, but I do not see how to remove the stem from it or replacements for the fitting The only thing that's left to do is replace the line. It's the low pressure line (without orifice) coming off the condenser back to the evaporator.
#2
#4
#5
This is a photo of the low side port on my truck. As you can see, it's not a schrader style port, however, I don't believe all is lost, as you can see in the next photo.
I believe this is a standard R134a low side port used on many different vehicles. Notice the provisions to allow the whole port to be unscrewed from the line in this photo. I'd try holding the bottom area with a wrench and unscrewing the top port off with the appropriate sized socket. These R134a low ports were available in R12 to R134a conversion kits and are available individually at most well stocked auto parts stores. Please give that a try in removing your port and let us all know how it goes.
#6
#7
Trending Topics
#9
Can you please post a side view photo of the port you removed? They make them in male and female threaded versions and I'm unsure what you have. Also, what state/part of the country do you live in?
Last edited by AtomicDog; 03-19-2022 at 12:43 PM.