When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Im doing more then a carb swap just starting there. Im looking for 600 horsepower and ill be dropping the clutch a good bit ngl i already do. Hopefully stock clutch will hold and hopefully the trans will too. Worst case ill nv4500 swap the truck.
At 600hp the stock clutch is still good. Unless you are dumping $25,000 and getting closer to 800 the stock clutch will most likely hold. Not the NV3500 will not I THINK it's only rated for 300hp and 380tq.
Just buy a twin disc clutch….it’s not considered stage 1 or 2, but the twin disc clutch will hold power and be all you need. We’ve ordered quite a few at shop for Cummins (nv4500) I don’t see how your having issue finding one?