Shake/vibration in seat 45 mph

Reply Subscribe

Thread Tools

Search this Thread

Mar 30, 2023 | 10:21 PM

#31

Keith_L

Record Breaker

Joined: Jan 2004

Posts: 1,429

Likes: 192

From: United States

Quote:

Originally Posted by Braintanned

Is Access to the retaining clips something I can get to easily under the diff cover without disturbing critical clearances etc on other stuff in there?

Definitely. The 9.25 is pretty easy to work on IMO.

You can get "wall toggle" bearing pullers for a slide hammer from HF. In the past I've also just used a small piece of flat bar threaded for the slide hammer threads. It has to be short enough to slip into the bearing at an angle but long enough to bridge the ID when roughly centered up.

If you pull both axles you can also drive them out with a long rod from the opposing side.