1999 Dodge ram 1500,”No Bus” flashing and Abs light, check engine, airbag light
#12
#13
#14
#15
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
yes it will, everything on it is working fine.
Should i also mention this problem wasn’t always happening when i got the truck, at first it was just the speedometer cutting in and out, one day after power washing my truck, on the way home i went over railroad tracks, i was going about 30 and it was pretty bumpy. Its what made speedo fully cut out and made my abs and brake light turn on.
A few weeks down the road and the “no bus” starts happening randomly when im driving down the road. Figured i might add this in not sure if itll help any
Should i also mention this problem wasn’t always happening when i got the truck, at first it was just the speedometer cutting in and out, one day after power washing my truck, on the way home i went over railroad tracks, i was going about 30 and it was pretty bumpy. Its what made speedo fully cut out and made my abs and brake light turn on.
A few weeks down the road and the “no bus” starts happening randomly when im driving down the road. Figured i might add this in not sure if itll help any
Last edited by Woopty23; 07-26-2024 at 02:42 PM.
#16
#18
#19
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
UPDATE: i have the cluster disconnected and the connections look good on both sides, i took a multimeter to them and im getting 11v on one pin and 12v on another (blue connector) on the other connector
(green connector) im getting 12v in 2 different pins and im also getting 2 pins really low voltage one fluctuating between 0.65-.90v and the other fluctuating between 0.75-1.05v (Key is On)
Last edited by Woopty23; 07-27-2024 at 10:37 AM.
#20