When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I'm going to step up to 33s on a 2000 1500 4wd. It has the stock chrome sawblade wheels, I just need to know how wide I can go with the stock backspacing.
Sorry for new q's- I just made the jump over to rams from jeep.
16x8 5/5.5 my backspace on the rims I just got is 4 5/8. Factory is 5 im pretty sure. I have 285/75/16 on the stock rims now and have rubbing only when the whells are fully turned.
i have 285's on stock wheels too.. but i didnt have any rubbing at all.. even with the wheel fully cut and going over bumps.. weird. but i have a 3 inch lift on it now so im looking to get 35's soon