2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Going to Napa specifics please

Thread Tools
 
Search this Thread
 
Old Dec 20, 2006 | 02:27 AM
  #11  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,944
Likes: 308
Default RE: Going to Napa specifics please

http://store.summitracing.com/egnsea...115+4294839113 these are for a 5.9... same wire set..
 
Reply
Old Dec 21, 2006 | 05:40 PM
  #12  
mattyge's Avatar
mattyge
Thread Starter
|
Veteran
Joined: Nov 2005
Posts: 257
Likes: 0
Default RE: Going to Napa specifics please

ok got everything except the wires, prolly going to order them but before i do one question, because they are thicker than the 7 mm stock ones does that mean i need a better coil. My coil went couple months ago and i replaced it with an OE replacement will this make a difference?
 
Reply
Old Dec 21, 2006 | 08:15 PM
  #13  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,944
Likes: 308
Default RE: Going to Napa specifics please

no, it'll work fine. if you do upgrade look into the MSD coil as well. Accel coils have had problems on the rams so i'd caution you against them... with the bigger wires you will need larger separators... I got a set of 8.0's and filed them some so the 8.5 wires would fit.
 
Reply
Old Dec 21, 2006 | 08:28 PM
  #14  
mattyge's Avatar
mattyge
Thread Starter
|
Veteran
Joined: Nov 2005
Posts: 257
Likes: 0
Default RE: Going to Napa specifics please

oh ok now i was looking through some online stores and i came across these and would like your opinion on them they are the ones from jegs. http://www.jegs.com/webapp/wcs/store...28681_-1_10691 also at my local store they sell bosch and champion wires are these any good either? I also noticed after i went to napa that the cap did not look like it had brass terminals they are of a silver colour is this ok. THanks again for your help
 
Reply
Old Dec 21, 2006 | 08:42 PM
  #15  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,944
Likes: 308
Default RE: Going to Napa specifics please

skip the brass cap & rotor, OEM is the best way to go... last time I did the Accell cap & rotor they did not last long. the wires would probably be fine, however I still recommend the MSD's... stay away from cheepies...
 
Reply
Old Dec 21, 2006 | 08:53 PM
  #16  
mattyge's Avatar
mattyge
Thread Starter
|
Veteran
Joined: Nov 2005
Posts: 257
Likes: 0
Default RE: Going to Napa specifics please

ok thanks very much for your help i'll have to make up my mind and i'll let ya know how it goes, hopefully with pictures
 
Reply
Old Dec 22, 2006 | 12:16 AM
  #17  
Aubrey's Avatar
Aubrey
Record Breaker
Joined: Dec 2006
Posts: 1,366
Likes: 1
From: Englewood, CO
Default RE: Going to Napa specifics please

I absolutely agree about the wires. My mileage improved when I put mine on. I have an Accel coil and I didn't notice any difference (never had a problem either)so not worth the money anyway.
 
Reply




All times are GMT -4. The time now is 10:17 PM.