2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Misfire help

Thread Tools
 
Search this Thread
 
Old Jan 8, 2007 | 02:56 PM
  #21  
osburn2027's Avatar
osburn2027
Thread Starter
Joined: Dec 2006
Posts: 9
Likes: 0
Default RE: Misfire help

timwag2001 your list of mods included some sensor mods can you tale me more about them
 
Reply
Old Jan 8, 2007 | 05:24 PM
  #22  
timwag2001's Avatar
timwag2001
All Star
Joined: May 2006
Posts: 775
Likes: 0
From: MA
Default RE: Misfire help

i got all those mods from here.
http://www.v8performance.com/tipsandtricks.htm
 
Reply
Old Jan 8, 2007 | 08:08 PM
  #23  
osburn2027's Avatar
osburn2027
Thread Starter
Joined: Dec 2006
Posts: 9
Likes: 0
Default RE: Misfire help

could you tall adiff
 
Reply
Old Jan 9, 2007 | 12:04 AM
  #24  
timwag2001's Avatar
timwag2001
All Star
Joined: May 2006
Posts: 775
Likes: 0
From: MA
Default RE: Misfire help

i think it feels al little bit peppier. its hard to tell. i'm deathflashed so im having some performance issues. getting a msd setup and a fastman in about a month. all my mods should compliment the msd and fastman pretty well.
 
Reply
Old Jan 11, 2007 | 02:15 AM
  #25  
osburn2027's Avatar
osburn2027
Thread Starter
Joined: Dec 2006
Posts: 9
Likes: 0
Default RE: Misfire help

how hard was it to do the tps sensor
 
Reply
Old Jan 11, 2007 | 02:28 AM
  #26  
timwag2001's Avatar
timwag2001
All Star
Joined: May 2006
Posts: 775
Likes: 0
From: MA
Default RE: Misfire help

not very hard at all. you just drill out the little rings and bolt it back on with washers. you need a voltage meter... you stick it in the middle wire and play with the sensor untill you get the correct volatge (.75 volts if i remember right) and tighten it up. while i was tightning it, the sensor was moving just enough to throw the voltage off though. its a little tricky to tighten it and hold it in place. but all in all, it was pretty easy.
the only one that was kinda a pain in the *** was the cps... because its in an awkward place to reach
 
Reply




All times are GMT -4. The time now is 12:45 AM.