I found the clips I got for the inner liner, and Splash guard didnt work the best, they worked. So I may find some better ones and replace all them on both sides. I also need to order a new Foam piece for inside the fender on the Pass. Side, mine tore trying to put it back in.
I got the new Rad Support today, One down side to it is they had to put a Lip on it. Front goes upward, back goes downward. So I shouldnt collect water easy, I might have to trim the plastic tho, since I think the downward lip will be in the way. I have it primed, Still need to drill all the holes, then prime the holes, bedliner, and I may even still undercoat it after that in some spots.
I got the new Rad Support today, One down side to it is they had to put a Lip on it. Front goes upward, back goes downward. So I shouldnt collect water easy, I might have to trim the plastic tho, since I think the downward lip will be in the way. I have it primed, Still need to drill all the holes, then prime the holes, bedliner, and I may even still undercoat it after that in some spots.
Something simple pretty much, I did have to Cut 2 Channels in it for the Rads bushings, Im in a hurry to get it in. I drilled the holes slightly to far forward, and could drill it bigger so I had to cut a channel. I intend to push the rad down to firmly press into it so I shouldnt move (altho my old support didnt do anything.)
Ill get some pics now, its drying.
Im in a hurry, becaues im out of town for atleast the next 2 weeks, if not a month.
Ill get some pics now, its drying.
Im in a hurry, becaues im out of town for atleast the next 2 weeks, if not a month.
And Shes Done! Only thing missing is the Plastic part under the rad support, looking at it and where it covered, It wasnt worth dealing with. I might have a front skid plate made up by the same people who did my Rad support (Rods Machine Shop) They have a few Custom done up trucks (Their own) with bumpers and such.
Altho Im pretty sure they shop that does my oil will hate me if I do, since it would cover the filter and funnel part, I might have a hatch part made for that, not sure.
Rad Support In place (I only used 6 bolts not 8, 4 on Top, 2 on Bottom)
How it looks under (all together)
Done (was also testing my lights to make sure they worked again)
Altho Im pretty sure they shop that does my oil will hate me if I do, since it would cover the filter and funnel part, I might have a hatch part made for that, not sure.
Rad Support In place (I only used 6 bolts not 8, 4 on Top, 2 on Bottom)
How it looks under (all together)
Done (was also testing my lights to make sure they worked again)
Quote:
I get 1 day of rest, then im on the road with a 2011 Caravan C/V for 2-4 Weeks, only back for weekends.Originally Posted by FrenicX
Congrats man, I bet it feels good
Actually this Van again, lol I already put over 2,000km on it (this pic was taken close to the end of the trip) Ill be putting I think, close to 10,000 on it over the entire trip this year, and its not even my work van, lol
It the only Unmarked (non-decaled) van we have.
