3rd Gen Dakota 2005 - 2011 Dodge Dakota Tech - The ultimate forum for technical help on the 3rd Gen Dakota.

Remote radio switches added..almost :(

Thread Tools
 
Search this Thread
 
Old Feb 21, 2011 | 05:46 PM
  #1  
Hammond_Egger's Avatar
Hammond_Egger
Thread Starter
|
Captain
Joined: May 2010
Posts: 522
Likes: 1
From: Delaware
Default Remote radio switches added..almost :(

Well,
I have added the remote radio switches to the steering wheel, ran and connected the wires needed...but no dice

I am getting 5v and the switches are altering the feed, but the radio is not responding.
I tried my stock radio and the RER nav unit, no good.

Only thing I am thinking is that either it has to be enabled via starscan or the instrument cluster is different (parts manual shows 4 different part numbers).

If any of you guys with factory switches happens to take out your cluster, can you get the part number from yours?

Thanks!
 
Reply
Old Feb 21, 2011 | 06:03 PM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,204
Likes: 363
From: Winston Salem, NC
Default

wow...sorry man..all that work....
 
Reply
Old Feb 21, 2011 | 06:36 PM
  #3  
Hammond_Egger's Avatar
Hammond_Egger
Thread Starter
|
Captain
Joined: May 2010
Posts: 522
Likes: 1
From: Delaware
Default

I am not giving up yet!
 
Reply
Old Feb 21, 2011 | 07:08 PM
  #4  
Hammond_Egger's Avatar
Hammond_Egger
Thread Starter
|
Captain
Joined: May 2010
Posts: 522
Likes: 1
From: Delaware
Default

Well, it looks as if there are only 2 models (MPH models) standard and premium, I have the premium...unless there is some weird revision thing.

Still not giving up.
 
Reply
Old Feb 21, 2011 | 07:17 PM
  #5  
Blown287's Avatar
Blown287
Grand Champion
Joined: Apr 2009
Posts: 5,293
Likes: 3
From: Kekaha, HI
Default

Would the dealership have to flash your PCM for it to work? I installed aftermarket fog lamps in the wife's 07 Durango and they wouldn't work without a dealership flash. Good luck brother.
 
Reply
Old Feb 21, 2011 | 07:56 PM
  #6  
Hammond_Egger's Avatar
Hammond_Egger
Thread Starter
|
Captain
Joined: May 2010
Posts: 522
Likes: 1
From: Delaware
Default

Hmm...I will give my buddy a call tomorrow.
 
Reply
Old Feb 21, 2011 | 08:11 PM
  #7  
Robk1971's Avatar
Robk1971
Professional
Joined: Feb 2010
Posts: 221
Likes: 0
From: Canada
Default

Is the tool required to flash a PCM to enable/disable certain functions available to the consumer or is it something only the dealers have access to? It doesn't sit right with me that I would be tied to the "stealer" if I want to add an accessory to my vehicle.
 
Reply
Old Feb 21, 2011 | 08:20 PM
  #8  
Hammond_Egger's Avatar
Hammond_Egger
Thread Starter
|
Captain
Joined: May 2010
Posts: 522
Likes: 1
From: Delaware
Default

Nope, dealer only (starscan) tool. If I need this done, I have someone on the side who can bring it home and help me out

The Ram guys added these without issue, but one side goes to ground where our Dakota ties into the MUX return

Still not convinced it has to be flashed!
 
Reply
Old Feb 21, 2011 | 08:22 PM
  #9  
Blown287's Avatar
Blown287
Grand Champion
Joined: Apr 2009
Posts: 5,293
Likes: 3
From: Kekaha, HI
Default

Our PCMs have certain "capabilities" even if the hardware isn't installed from the factory. If you install the item you have to pay the dealer to hook their computer into the PCM to enable those capabilities.

My Wife's 4x4 Durango was an SXT and didn't even have slots in the bumper for fox lights. I drilled out her bumper, painted it, installed the fog lamp harness and foglights. They would not work, come to find out if the vehicle isn't equiped with that option you have to pay them to enable it. Really pissed me off.
 
Reply
Old Feb 21, 2011 | 08:38 PM
  #10  
Robk1971's Avatar
Robk1971
Professional
Joined: Feb 2010
Posts: 221
Likes: 0
From: Canada
Default

The Starscan as in this here?
http://www.automotive-diagnostic-too.../ch9400-am.htm

Well I guess for almost 5K the stealer is still the better bet. Still a **** of though.
 
Reply



All times are GMT -4. The time now is 12:28 AM.