anyone try this led conversion inside D
#1
anyone try this led conversion inside D
http://www.ebay.com/itm/2011-2012-Do...sories&vxp=mtr
Looks nice but might be too bright, what ya think.
Looks nice but might be too bright, what ya think.
#3
Id be interested because ive already done all the interior you can besides the reader round ones in the back and front because its already an LED soldered to a circuit board so to change those youd have to desolder and resolder the new colored LED. If they have a solution this would be great!
#4
Id be interested because ive already done all the interior you can besides the reader round ones in the back and front because its already an LED soldered to a circuit board so to change those youd have to desolder and resolder the new colored LED. If they have a solution this would be great!
#7
I got all my LEDs from www.superbrightleds.com and ill give you the part number and picture of one when i get home. I had 14 of one kind for domes, back hatch, and footwell. Along with 4 of another type for the rear tail lights on the hatch not on the corners. All totalled like 100 bucks with shipping. All are pure white and single LEDs on the interior no canbus errors and to me the perfect balance of brightness
Trending Topics
#8
Picture heavy
Ok so here is the skinny on all the LEDs on my D. CAUTION PICTURE HEAVY!!!!!!!
1. Fog Lights: Dodge Part Number for bulb is PSX24W according to their android mobile app. So on www.autolumination.com under the fog light/headlight section you find these,
This is what they look like in person,
This is the identical bases
This is what they look like in
This is what they look like on
Color match is almost identical although in the picture the fogs look a little more blue. Factory HID's above.
2. As for the interior it goes as follows:
2 LEDs in Hatch
1 LED in Center Last Row
1 LED in Center Middle Row
2 LEDs in Front Dome
2 LEDs in Footwell (1 on each side)
These were purchased from www.superbrightleds.com the interior LED is this one
and this is the Rear one
Here is the interior rear 2 rows
Here is the rear hatch
--------------------------------Continued-----------------------------
1. Fog Lights: Dodge Part Number for bulb is PSX24W according to their android mobile app. So on www.autolumination.com under the fog light/headlight section you find these,
This is what they look like in person,
This is the identical bases
This is what they look like in
This is what they look like on
Color match is almost identical although in the picture the fogs look a little more blue. Factory HID's above.
2. As for the interior it goes as follows:
2 LEDs in Hatch
1 LED in Center Last Row
1 LED in Center Middle Row
2 LEDs in Front Dome
2 LEDs in Footwell (1 on each side)
These were purchased from www.superbrightleds.com the interior LED is this one
and this is the Rear one
Here is the interior rear 2 rows
Here is the rear hatch
--------------------------------Continued-----------------------------
#9
Continued
Here is the Front area
Now from far they seem pretty okay until your IN the car itself, here is the middle row with the center being the one i changed and the outer 2 not being able to change
Now here is the Front.....
See the major color descrepency? The only way to color match the back two rows would be to make a new board which the company i work for can do or just desolder the LED
and put the right color in its place
Now for the Rear End i put LEDs in the Hatch rear lights and it seems to be slightly brighter and light is alot more even in my opinion in person.
Here is what they look like in
Here is what they look like on
Now in this one the right seems more orange then the left factory bulb but thats just a deception between brightness angle and crappy phone camera lol.
Its actually alot more even in light and brighter.
Now from far they seem pretty okay until your IN the car itself, here is the middle row with the center being the one i changed and the outer 2 not being able to change
Now here is the Front.....
See the major color descrepency? The only way to color match the back two rows would be to make a new board which the company i work for can do or just desolder the LED
and put the right color in its place
Now for the Rear End i put LEDs in the Hatch rear lights and it seems to be slightly brighter and light is alot more even in my opinion in person.
Here is what they look like in
Here is what they look like on
Now in this one the right seems more orange then the left factory bulb but thats just a deception between brightness angle and crappy phone camera lol.
Its actually alot more even in light and brighter.