Koning's Lifted Durango BUILD!
#85
I've never posted on here before, but I wanted to share another success with the RRO lift in the 2011 Durango. I did the 2.5" lift kit with the new arms. I did the install myself and took me about 10-11 hours to do so. The front end of the lift really is a b***h to install, especially the driver side and by yourself. Lol
Went with some 275/55/20 BFGoodrich KO2 tires ( almost perfect reviews, how can you not ) and some Moto Metal rims with the red accents.
I haven't done much yet, but the lift and tires were definitely a must. TheKoning you are the inspiration to lift these Durangos. I've always had lifted trucks, so as soon as I got the 3G Durango I started doing research. Very pleased with the turn out!
Here's some pics
Went with some 275/55/20 BFGoodrich KO2 tires ( almost perfect reviews, how can you not ) and some Moto Metal rims with the red accents.
I haven't done much yet, but the lift and tires were definitely a must. TheKoning you are the inspiration to lift these Durangos. I've always had lifted trucks, so as soon as I got the 3G Durango I started doing research. Very pleased with the turn out!
Here's some pics
#87
#88
I added some black and red badges that say Hemi 5.7l. I'm working on getting all the stock badges in red as well.
#90
The tall circular spacers in the center are the rear spring spacers; they go on the bottom of the sprinng and are held in place with the circular plates below them. The sort of rectangular spacers in the lower right are the front spacers that bolt to the top of the shock strut. The diamond shaped plates bolt to the top of the rear shock struts. And control arms, ball joints, hardware, and pretty detailed instructions.