Superchips Questions and Updates
Grand Champion
Joined: Dec 2008
Posts: 6,556
Likes: 1
From: TX
All Star
Joined: Dec 2005
Posts: 809
Likes: 0
From: GA
As promised, Tom e-mailed me an update today. He asked me to share it with the forum. I really appreciate the fact he's taking the time to update us all.
Sil
We’re making good progress on the Hemi options. I just left a meeting where we were outlining the user interface. On part-throttle and WOT shifts, we’re developing a user-adjustable menu so the users can manipulate each RPM range for each shift (1-2, 2-3, etc). It will be very powerful stuff that should set the standard for advanced transmission tuning.
As always it’s a late to our timelines. We had field issues for (1) VIN lockouts, (2) Jeep gear calibrations, (3) JTEC ECUs, (4) 4.7L Grand Cherokee tuning, (5) TPMS, etc. The team is now focusing on improving programming reliability, 2008 MY 4.7L, 2009 5.7L, Hemi options (trans options, idle adjust), and some new DAQ capabilities. No ETA on the Hemi options but they are further along than last time.
Tom Bennett
Superchips, Inc.
As always it’s a late to our timelines. We had field issues for (1) VIN lockouts, (2) Jeep gear calibrations, (3) JTEC ECUs, (4) 4.7L Grand Cherokee tuning, (5) TPMS, etc. The team is now focusing on improving programming reliability, 2008 MY 4.7L, 2009 5.7L, Hemi options (trans options, idle adjust), and some new DAQ capabilities. No ETA on the Hemi options but they are further along than last time.
Tom Bennett
Superchips, Inc.
Sil
Rookie
Joined: May 2009
Posts: 67
Likes: 0
From: MO
Im sure the answer to my question is on here somewhere but its so full of info there are 62 pages so i was wonderin if someone could tell me what is the best programmer for my 03 Dodge ram 1500 5.7L Hemi with dual flowmaster exhaust and k&n cold air intake. Plz help thanks all!
All Star
Joined: Dec 2005
Posts: 809
Likes: 0
From: GA
Im sure the answer to my question is on here somewhere but its so full of info there are 62 pages so i was wonderin if someone could tell me what is the best programmer for my 03 Dodge ram 1500 5.7L Hemi with dual flowmaster exhaust and k&n cold air intake. Plz help thanks all!
http://www.superchips.com/products.p...e+Gas+Flashpaq
Sil
3rd gen Ram, Newbies
Joined: May 2008
Posts: 3,815
Likes: 0
From: Chicago
Scott has asked us to start another thread, i'm sure the members will be nice and comply.
Im sure the answer to my question is on here somewhere but its so full of info there are 62 pages so i was wonderin if someone could tell me what is the best programmer for my 03 Dodge ram 1500 5.7L Hemi with dual flowmaster exhaust and k&n cold air intake. Plz help thanks all!
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
Wasn't trying to take it off topic, just putting a little comparison out there between SC and another product. I did start another thread about this yesterday bc I didn't want to see the thread head in a direction of comparing tuners. This a good thread with lots of useful info and I would hate to see it go off topic.
Veteran
Joined: Feb 2009
Posts: 267
Likes: 0
From: Washington State
Ok so it sounds like a few more of the updating bugs have been worked out so i went ahead and updated my cortex today. Well after updating my tuner and then updating the tune in my truck I started going through some of the functions it has.
When I went into the tire sizing function it showed 31.5" tires. My truck came with 33's and I curently have 33's on the truck.
My question is should I have changed it to 33" tire size from the 31.5" that it showed?
When I went into the tire sizing function it showed 31.5" tires. My truck came with 33's and I curently have 33's on the truck.
My question is should I have changed it to 33" tire size from the 31.5" that it showed?
Professional
Joined: Feb 2009
Posts: 219
Likes: 0
From: Little Rock, Arkansas
Question about updating my tuner. I have the 3815 and am currently running the 91 tune. If I want to update the tuner do I need to set my truck back to stock BEFORE I update? In other words, will my tuner lose my stock tune if I update it?