Data Loggers
#381
AZZ0540, Thats a good baseline at 7.91. 6700 Lbs WOW thats heavy man.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
0-60 7.91 w/Traction Ctrl/ESP 7.11 W/O
0-70 9.21 best think w/o
1/4 mile 15.69@ 87 w/o
1/4 mile 15.82@ 84 w/ and tryin not to hit Fin bowtie SUV
Hard to find good roads to do pulls on in this area
#387
drive by wire throttle does what torq mana want not always waht i want
with ESP on you can hear the truck rev up and drop back down to launch
#388
Quote:
Originally Posted by 03MopaRamman
AZZ0540, Thats a good baseline at 7.91. 6700 Lbs WOW thats heavy man.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
Quote: Quote: AZZ0540:
Last few runs before do real Mods IE K&N intake
0-60 7.91 w/Traction Ctrl/ESP 7.11 W/O
0-70 9.21 best think w/o
1/4 mile 15.69@ 87 w/o
1/4 mile 15.82@ 84 w/ and tryin not to hit Fin bowtie SUV
Hard to find good roads to do pulls on in this area
Still curious about the gearing question wrt what ratio you got?
Originally Posted by 03MopaRamman
AZZ0540, Thats a good baseline at 7.91. 6700 Lbs WOW thats heavy man.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
Quote: Quote: AZZ0540:
Last few runs before do real Mods IE K&N intake
0-60 7.91 w/Traction Ctrl/ESP 7.11 W/O
0-70 9.21 best think w/o
1/4 mile 15.69@ 87 w/o
1/4 mile 15.82@ 84 w/ and tryin not to hit Fin bowtie SUV
Hard to find good roads to do pulls on in this area
Still curious about the gearing question wrt what ratio you got?
#389
Quote:
Originally Posted by 03MopaRamman
AZZ0540, Thats a good baseline at 7.91. 6700 Lbs WOW thats heavy man.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
Quote: Quote: AZZ0540:
Last few runs before do real Mods IE K&N intake
0-60 7.91 w/Traction Ctrl/ESP 7.11 W/O
0-70 9.21 best think w/o
1/4 mile 15.69@ 87 w/o
1/4 mile 15.82@ 84 w/ and tryin not to hit Fin bowtie SUV
Hard to find good roads to do pulls on in this area
Still curious about the gearing question wrt what ratio you got?
Originally Posted by 03MopaRamman
AZZ0540, Thats a good baseline at 7.91. 6700 Lbs WOW thats heavy man.
Laramie must have 3.92's?
No idea whats my weight is (the truck). Currently at 7.97 with my all my mods and 3.55.s. Plan to install the e-fan in the next week (I hope) so we'll see what that does to improve the old girls performance.
Quote: Quote: AZZ0540:
Last few runs before do real Mods IE K&N intake
0-60 7.91 w/Traction Ctrl/ESP 7.11 W/O
0-70 9.21 best think w/o
1/4 mile 15.69@ 87 w/o
1/4 mile 15.82@ 84 w/ and tryin not to hit Fin bowtie SUV
Hard to find good roads to do pulls on in this area
Still curious about the gearing question wrt what ratio you got?
#390
OK, No probs. Your Diff gearing should be listed on the sticker in your glove box lid, if you have one (I mean sticker), I'm guessin you got 3.92 being a Laramie? Cause you are pretty quick for almost stock, you got a strong mill in that sled. Alternatively you can crawl underneath and read the Tag thats attached to one of your Diff Cvr bolts usually RH side near top.