Data Loggers
Grand Champion
Joined: May 2006
Posts: 6,041
Likes: 0
From: Gilbert, Arizona
I thought you steared away from the AI and went with something else AF. If you have a transfercase you are gonna have to drop the exhaust in order to get the TC in (another good reason not to have the y welded to your headers).
Captain
Joined: Feb 2010
Posts: 574
Likes: 0
From: Southern, Alberta
Yeah Thats what I thought the AF was at first, Guage as per your photo and to go with the DSP, got it, AeroTurbine is the loud muffler Right. OK got some caffeine now (day 3 without a smoke) and am wanting a cold beer,LAO. Is that the TQ you were wanting to sell earlier?
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
Did you get that one on DT? I saw you posting in that thread and was wondering if you pulled the trigger on that deal.
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
TCI Breakaway-Torque Converter Ordered Today. Now just gotta save up for ATF4 at $6.89 a Quart up here in Canada, so how many do I need for this job guys (12?) and where do I find that DIY I seen before on here? can I do this in the driveway (I have dolly and lots of stands / jacks) or do i need the hoist.
It will be interesting to see what this mod will do for my current Data Log of 6.59.
At the same time I will up the shift from 6200 to 6300 as suggested after last run by Truckin. Wish I had the money for the PML pan but at 300 bucks I could put that towards my gears. Sold my Camper last week so will not have that strain on the Tranny. Will also consider changing out the Cooler as per what VA did at same time and just repaint my pan for now.
It will be interesting to see what this mod will do for my current Data Log of 6.59.
At the same time I will up the shift from 6200 to 6300 as suggested after last run by Truckin. Wish I had the money for the PML pan but at 300 bucks I could put that towards my gears. Sold my Camper last week so will not have that strain on the Tranny. Will also consider changing out the Cooler as per what VA did at same time and just repaint my pan for now.
Champion
Joined: Jan 2009
Posts: 3,411
Likes: 1
From: Minot AFB, ND in person, the 'burgh at heart
Yeah i wasnt planning on doing the AI, but got it for $200 exactly how i would have ordered it (black on black with red lighting). I have a dual pod right now and really dont like the cluttered look. I wanna go back to the SRT pod, and using the AI will allow me to do that.
The torque converter im putting in is not the same one I was wanting to sell. That one did get sold to another member on here. I'm sure he'll post up when he gets it in. It'll be good for him to get the "webs" off the 'ol tools and do some modding again. yes, there is a pun in there
The TC im putting in is the same thing, just never installed before and 2600 stall instead of low mileage with 2800 stall thats gettin a new start with a cut/clean
The torque converter im putting in is not the same one I was wanting to sell. That one did get sold to another member on here. I'm sure he'll post up when he gets it in. It'll be good for him to get the "webs" off the 'ol tools and do some modding again. yes, there is a pun in there
The TC im putting in is the same thing, just never installed before and 2600 stall instead of low mileage with 2800 stall thats gettin a new start with a cut/clean
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
Yeah i wasnt planning on doing the AI, but got it for $200 exactly how i would have ordered it (black on black with red lighting). I have a dual pod right now and really dont like the cluttered look. I wanna go back to the SRT pod, and using the AI will allow me to do that.
The torque converter im putting in is not the same one I was wanting to sell. That one did get sold to another member on here. I'm sure he'll post up when he gets it in. It'll be good for him to get the "webs" off the 'ol tools and do some modding again. yes, there is a pun in there
The TC im putting in is the same thing, just never installed before and 2600 stall instead of low mileage with 2800 stall thats gettin a new start with a cut/clean
The torque converter im putting in is not the same one I was wanting to sell. That one did get sold to another member on here. I'm sure he'll post up when he gets it in. It'll be good for him to get the "webs" off the 'ol tools and do some modding again. yes, there is a pun in there
The TC im putting in is the same thing, just never installed before and 2600 stall instead of low mileage with 2800 stall thats gettin a new start with a cut/clean
Any chance that tc went to froggy?
