3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Wheel offset??

Thread Tools
 
Search this Thread
 
Old Feb 21, 2011 | 03:02 PM
  #21  
g-Dog's Avatar
g-Dog
Registered User
Joined: Dec 2010
Posts: 9
Likes: 0
Default

Originally Posted by BigTXRam
G-dog..... THATS WTF IM TALKING ABOUT RIGHT THERE. That looks sah-weet. You lifted or leveled or both?
It has a 2.5" leveling kit on the front...and 1.5" blocks on the rear.
 
Reply
Old Feb 22, 2011 | 12:39 PM
  #22  
BigTXRam's Avatar
BigTXRam
Professional
Joined: May 2010
Posts: 139
Likes: 0
From: Outside of Austin, Texas
Default

ok cool. ive read several folks say that 35s look stuffed without a lift but i think it looks real good. mines leveled in the front so 35's should sit real nice under the wheel well. Have you had any rubbing issues?
 
Reply
Old Feb 22, 2011 | 04:34 PM
  #23  
g-Dog's Avatar
g-Dog
Registered User
Joined: Dec 2010
Posts: 9
Likes: 0
Default

Originally Posted by BigTXRam
ok cool. ive read several folks say that 35s look stuffed without a lift but i think it looks real good. mines leveled in the front so 35's should sit real nice under the wheel well. Have you had any rubbing issues?
There is no rubbing whatsoever going forward...lock to lock. But for some reason, in reverse, there is some very slight rubbing at about 3/4 turn.
 
Reply
Old Feb 23, 2011 | 01:08 AM
  #24  
BigTXRam's Avatar
BigTXRam
Professional
Joined: May 2010
Posts: 139
Likes: 0
From: Outside of Austin, Texas
Default

hmm...bad rubbing or just slight? Hopefully Hammer or Dirtydog will tune in with a cause and solution
 
Reply




All times are GMT -4. The time now is 05:52 PM.