3rd Gen RAM general discussion/NON-tech This section is for general discussions about your 3rd gen RAM. Non tech related RAM threads belong here.

Magnaflow vs Cherry Bomb

Thread Tools
 
Search this Thread
 
Old Mar 16, 2011 | 02:17 PM
  #21  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

More pipe to hang, not stainless like stock so it will rust. Personally, I would put a good stainless Y in place of thew stock one and leave the stainless pipe. I left mine all stock until the Magnaflow cat-back. I didn't use the provided mid pipe because it is for the 06/07 with a front resonator and our 08 doesn't have one.
 
Reply
Old Mar 17, 2011 | 06:38 AM
  #22  
Brandon Anderson's Avatar
Brandon Anderson
Thread Starter
|
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

Originally Posted by lxman1
More pipe to hang, not stainless like stock so it will rust. Personally, I would put a good stainless Y in place of thew stock one and leave the stainless pipe. I left mine all stock until the Magnaflow cat-back. I didn't use the provided mid pipe because it is for the 06/07 with a front resonator and our 08 doesn't have one.
Everything coming out is being replaced with SS. I'm not letting them put crappy tubing down there that I'll have to replace in two years because it's full of holes!
 
Reply
Old Mar 18, 2011 | 11:51 AM
  #23  
Brandon Anderson's Avatar
Brandon Anderson
Thread Starter
|
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

So after stopping by the exhaust shop and talking with one of the techs, I decided to ditch the "Y" and go straight into a dual in/out Magnaflow 11379. Got the muffler for $88 shipped, and the install will come to $270 including the two rectangular tips. Can't wait until next Friday!
 
Reply
Old Mar 27, 2011 | 09:18 AM
  #24  
Brandon Anderson's Avatar
Brandon Anderson
Thread Starter
|
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

Got everything but the tips installed on Friday. Turns out that the 11379 is not an "X" on the inside. There's honeycomb between the two sides, but they don't cross side-to-side. I can't even hear it inside the cab at idle, but it sounds pretty good otherwise, though a bit "fluttery".












 
Reply
Old Mar 27, 2011 | 02:04 PM
  #25  
pitbull24's Avatar
pitbull24
Veteran
Joined: Aug 2010
Posts: 463
Likes: 0
From: McHenry, IL
Default

Is it just me, or are those exits a little far apart? If you wanted it like that cool, but I think they'd look better a little tighter.
 
Reply
Old Mar 27, 2011 | 03:28 PM
  #26  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default

Originally Posted by pitbull24
Is it just me, or are those exits a little far apart? If you wanted it like that cool, but I think they'd look better a little tighter.
I'm thinking he's going for the "Gibson" type rectangular tips which need that spacing. Because of their shape, they'll end up just about touching.


Originally Posted by Brandon Anderson
I can't even hear it inside the cab at idle, but it sounds pretty good otherwise, though a bit "fluttery".
The Maggies almost never drone in the cab, even on MDS Hemis. I think you made a good choice. I prefer the sound of the Cherry Bombs, myself, but I can go under and cut/reweld another muffler in anytime myself with minimal cost. Since you were paying for it to be done, going all stainless right down to the Maggie muffler will cost you less in the long run...
 

Last edited by HammerZ71; Mar 27, 2011 at 03:33 PM.
Reply
Old Mar 27, 2011 | 11:18 PM
  #27  
Brandon Anderson's Avatar
Brandon Anderson
Thread Starter
|
All Star
Joined: Feb 2011
Posts: 928
Likes: 0
From: South Texas
Default

Originally Posted by HammerZ71
I'm thinking he's going for the "Gibson" type rectangular tips which need that spacing. Because of their shape, they'll end up just about touching.
Yessir. Once the tips are installed, they're going to be very close to each other.



Originally Posted by HammerZ71
The Maggies almost never drone in the cab, even on MDS Hemis. I think you made a good choice. I prefer the sound of the Cherry Bombs, myself, but I can go under and cut/reweld another muffler in anytime myself with minimal cost. Since you were paying for it to be done, going all stainless right down to the Maggie muffler will cost you less in the long run...
I did like the sound clips of the Cherry Bombs better, as far as I can tell from the clips anyway, but I'm certainly not unhappy with the way it is right now. I am glad I waited for the 11" muffler instead of the 22" he had on-hand when I first went in though. I don't think I would have been happy with that one.
 
Reply




All times are GMT -4. The time now is 03:54 PM.