putting in a cb and too big for dash..Any thoughts ?
Professional
Joined: Feb 2007
Posts: 156
Likes: 0
From: coastal Massachusetts
Here are a couple of the older posts; many of the photos are missing due to their age.
https://dodgeforum.com/forum/3rd-gen...cb-radios.html
Posts numbers 25 and 72 is a nice home made set up!
https://dodgeforum.com/forum/dodge-c...ou-must-2.html
Good luck,
Matt
https://dodgeforum.com/forum/3rd-gen...cb-radios.html
Posts numbers 25 and 72 is a nice home made set up!
https://dodgeforum.com/forum/dodge-c...ou-must-2.html
Good luck,
Matt
Last edited by mopar74; Mar 28, 2011 at 04:00 AM. Reason: Add info.
Rookie
Joined: May 2010
Posts: 81
Likes: 0
From: VA
I haven't taken any pictures of mine yet, since I just put it in a couple weeks ago.
My CB is a smaller unit that I mounted inside the storage pocket directly below the stereo. It sits almost exactly flush with the other controls for the stereo and climate controls.
The Coax runs behind the dash to the floor, underneith the kick panels to the drivers side back seat. There is a plug there under the carpet that pops out really easy.
I have dual Wilson antennas that are mounted inside the cut-out in the bedrail just behind the cab. so the coax just runs up the inside of the bed and connects....
whole set-up works great... I'll try and get some picks later
My CB is a smaller unit that I mounted inside the storage pocket directly below the stereo. It sits almost exactly flush with the other controls for the stereo and climate controls.
The Coax runs behind the dash to the floor, underneith the kick panels to the drivers side back seat. There is a plug there under the carpet that pops out really easy.
I have dual Wilson antennas that are mounted inside the cut-out in the bedrail just behind the cab. so the coax just runs up the inside of the bed and connects....
whole set-up works great... I'll try and get some picks later