VHT tinting my taillights
#11
#12
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Just make sure the coppers dont pull u over and give u a fine.I have a set recon tails and had then tinted which were smoked to begin with the looked awsome till i got pulled over one day for taillights not being visable at 150m but told cop that do u drive with your lights in the middle of the day.Turned lights on cop got pissy cause i proved him wrong since u could clearly see my taillights then well she went around car and then made me put my windows up wich had tint ..Well long story short i had to comply to take off tint within 7 days or would recive $350 in fines i cry when i see my truck without tint .....FOr now buhah
#14
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I finally got some pics to post. I haven't got the nerve up to wetsand them yet but I thought the clear went on pretty smooth. I masked off the backup lense area of the taillights and the part of the lense in the third brake light that lights up your bed. I thought they looked pretty cool. Let me know what ya think. Also while I was working on her Saturday I switched my brake pads over to ceramic pads and painted all my calipers and caliper adaptors.
![Name: rttailtintvert.jpg
Views: 25
Size: 9.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65795d1501339317-vht-tinting-my-taillights-rttailtintvert.jpg)
![Name: ltbulight2.jpg
Views: 27
Size: 10.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65796d1501339317-vht-tinting-my-taillights-ltbulight2.jpg)
![Name: 3rdbrake.jpg
Views: 25
Size: 14.5 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65797d1501339317-vht-tinting-my-taillights-3rdbrake.jpg)
![Name: lttaillight.jpg
Views: 33
Size: 16.4 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65798d1501339317-vht-tinting-my-taillights-lttaillight.jpg)
![Name: rttailtintvert.jpg
Views: 25
Size: 9.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65795d1501339317-vht-tinting-my-taillights-rttailtintvert.jpg)
![Name: ltbulight2.jpg
Views: 27
Size: 10.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65796d1501339317-vht-tinting-my-taillights-ltbulight2.jpg)
![Name: 3rdbrake.jpg
Views: 25
Size: 14.5 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65797d1501339317-vht-tinting-my-taillights-3rdbrake.jpg)
![Name: lttaillight.jpg
Views: 33
Size: 16.4 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65798d1501339317-vht-tinting-my-taillights-lttaillight.jpg)
![Name: ed8.jpg
Views: 23
Size: 17.2 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65799d1501339317-vht-tinting-my-taillights-ed8.jpg)
Last edited by ricer; 05-31-2011 at 08:06 PM.
#17
#18
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Thanks guys. I put two coats of VHT on and four coats of clear. Yea I know the garage door opener is really close... lol. The pic actually is deceiving because there is just a little over an inch between the opener and my satellite radio antenna. So much for getting any taller tires. ![Frown](https://dodgeforum.com/forum/images/smilies/frown.gif)
![](http://i1228.photobucket.com/albums/ee458/ricer2231/Ellis%20Dam%20photos/ed8.jpg)
![Frown](https://dodgeforum.com/forum/images/smilies/frown.gif)
![](http://i1228.photobucket.com/albums/ee458/ricer2231/Ellis%20Dam%20photos/ed8.jpg)
#19
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I finally got the nerve up to wetsand and buff these out and if I do say so myself they turned out awesome. I am really glad I wetsanded them and buffed them I think it made a world of difference. I wetsanded them with 2000 grit and hand buffed them with Meguiars Ultimate Compound, that is some sweet stuff. I put a good thick layer of compound on and rubber the hell out of them, wiped them off, and did a second round of rubbing compound. Then rubbed them somemore with a microfiber towel. It's like I had read on a thread, the more you rub them the better they will look. Here are a few pics of them all done.
![Name: Tailsandthirdbuffed.jpg
Views: 26
Size: 10.5 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65695d1501339057-vht-tinting-my-taillights-tailsandthirdbuffed.jpg)
![Name: ltblbuffed.jpg
Views: 25
Size: 13.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65696d1501339057-vht-tinting-my-taillights-ltblbuffed.jpg)
![Name: rttailbuffed.jpg
Views: 25
Size: 14.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65697d1501339057-vht-tinting-my-taillights-rttailbuffed.jpg)
![Name: thirdbrakebuffed.jpg
Views: 30
Size: 10.9 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65698d1501339057-vht-tinting-my-taillights-thirdbrakebuffed.jpg)
![Name: Tailsandthirdbuffed.jpg
Views: 26
Size: 10.5 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65695d1501339057-vht-tinting-my-taillights-tailsandthirdbuffed.jpg)
![Name: ltblbuffed.jpg
Views: 25
Size: 13.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65696d1501339057-vht-tinting-my-taillights-ltblbuffed.jpg)
![Name: rttailbuffed.jpg
Views: 25
Size: 14.3 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65697d1501339057-vht-tinting-my-taillights-rttailbuffed.jpg)
![Name: thirdbrakebuffed.jpg
Views: 30
Size: 10.9 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65698d1501339057-vht-tinting-my-taillights-thirdbrakebuffed.jpg)
![Name: ed8.jpg
Views: 27
Size: 17.2 KB](https://dodgeforum.com/forum/attachments/3rd-gen-ram-general-discussion-non-tech/65699d1501339057-vht-tinting-my-taillights-ed8.jpg)