Seafoam/maintenance question
#12
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Yeah, not fun. I have decided it's worth the $300 (price includes the plugs) to have the dealer do it. Even my buddy who has the same truck as me and did the plugs himself once has said never again. And the great thing about having a dealer do work on your truck is if they break or screw anything up, it's their problem, not yours. That paid for itself with me ten fold when i had a Chevy Tahoe and brought it in to have the Master cylinder changed. It' an easy repair i would have done myself, but i had no time. When i picked the truck up i saw what looked like melted plastic all over the front of my drivers side headlights, turn signals and bumper. I popped the hood and saw the top of the grill was cracked and somebody had went overboard with Krazy Glue. I walked back in and got the service manager who agreed it was not right. And since you cannot clean off that residue... I got a brand new grill, drivers side headlights, turn signals and new front bumper (the bumper was factory painted, not chrome).
#13
#17
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
since ram is new to me i just changed the plugs.
took me 1.5 hrs. other than it being hard to reach cuz everything is so high up and long reach its really no big deal. that included removing TB and a severe scrubbing on it. i did unclip the egr tube at rear of TB/intake to give more wiggle room on pass side.
need: 2) 3" extensions, socket wrench, spark plug socket, and a u-joint just to make hand turning easier (not for torqing down), but does provide extra finger grip on cyl 7 and 8. on cyl 6 i used a 12" extension by evap can to save my short reach again. and a 10mm for coil packs.
took me 1.5 hrs. other than it being hard to reach cuz everything is so high up and long reach its really no big deal. that included removing TB and a severe scrubbing on it. i did unclip the egr tube at rear of TB/intake to give more wiggle room on pass side.
need: 2) 3" extensions, socket wrench, spark plug socket, and a u-joint just to make hand turning easier (not for torqing down), but does provide extra finger grip on cyl 7 and 8. on cyl 6 i used a 12" extension by evap can to save my short reach again. and a 10mm for coil packs.
#18
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
Ah yes. Nothing like going into 7/11 covered from head to toe in grease because you ran out of beer in the middle of a job.
#19