Homebrew CAI and few other minor mods
#111
I may be missing something here, but how is a license plate gonna protect the ac hose any better than the pvc touching it. Last time I looked PVC was very smooth, much smoother than that plate, so I see no protection from the plate at all, unless there is a junction under the plate that has a sharp edge
#112
Not talking about the edges of the plate, wondering if there is a pvc junction being covered by the plate. If not the plate is useless, because the pvc is smoother than the plate. the plate would only be of any benefit if it was protecting the ac hose from the sharp edge of a pvc junction
#114
#115
The 4 inch K&N cone filter that I got form AutoZone was too big. It was wedged up against the housing of the original airbox at a bad angle. I need a 4 inch filter that is a little shorter in length/height. Can someone reply with a 4inch K&N part number that fits?
#117
#120
I'm not talking about the airbox itself I have that out. Its the mount that the air box slides on to. This is a picture of what I'm talking about.
http://image.truckinweb.com/f/tech/1...nt-removed.jpg
http://image.truckinweb.com/f/tech/1...nt-removed.jpg