3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

need help removing deck!

Thread Tools
 
Search this Thread
 
Old May 2, 2007 | 09:21 PM
  #1  
Eckel's Avatar
Eckel
Thread Starter
|
Rookie
Joined: Nov 2006
Posts: 91
Likes: 0
From:
Default need help removing deck!

How do I remove the factory deck?
 
Reply
Old May 2, 2007 | 09:33 PM
  #2  
HighDuke1911's Avatar
HighDuke1911
Champion
Joined: May 2006
Posts: 4,616
Likes: 0
From: San Diego
Default RE: need help removing deck!

go to the Audio/Visual Electronics section. habeba will be more than glad to help you out!
 
Reply
Old May 2, 2007 | 09:47 PM
  #3  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default RE: need help removing deck!

Unscrew the little screw behind the bag hook. PULL. Unscrew 4 bolts holding unit. Pull out and disconnect wires.
OR you could go download the factory service manual, which tells you in detail with picture how to do it.
 
Reply
Old May 2, 2007 | 10:23 PM
  #4  
Eckel's Avatar
Eckel
Thread Starter
|
Rookie
Joined: Nov 2006
Posts: 91
Likes: 0
From:
Default RE: need help removing deck!

Do you know how I get out the chord on the upper right side?
 
Reply
Old May 2, 2007 | 10:39 PM
  #5  
hemiyellow's Avatar
hemiyellow
DC Insider
Joined: Aug 2005
Posts: 2,681
Likes: 1
From: cedar falls, ia
Default RE: need help removing deck!

pull
 
Reply
Old May 2, 2007 | 10:42 PM
  #6  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default RE: need help removing deck!

The antenna plug? Be very careful, you have to pull the little sleeve up first, then pull the plug out.
 
Reply
Old May 2, 2007 | 10:45 PM
  #7  
Eckel's Avatar
Eckel
Thread Starter
|
Rookie
Joined: Nov 2006
Posts: 91
Likes: 0
From:
Default RE: need help removing deck!

I have been pulling and pulling and it will not come out!
 
Reply
Old May 2, 2007 | 10:46 PM
  #8  
HemiLonestar's Avatar
HemiLonestar
Banned
Joined: Nov 2005
Posts: 3,739
Likes: 8
From: MD
Default RE: need help removing deck!

Give it some torque, but just be careful not to yank the cable out of the terminal. I almost did. That would suck.
 
Reply
Old May 2, 2007 | 10:47 PM
  #9  
Eckel's Avatar
Eckel
Thread Starter
|
Rookie
Joined: Nov 2006
Posts: 91
Likes: 0
From:
Default RE: need help removing deck!

Yea I thinks it the antenna plug. I just wont come out
 
Reply
Old May 2, 2007 | 10:49 PM
  #10  
Eckel's Avatar
Eckel
Thread Starter
|
Rookie
Joined: Nov 2006
Posts: 91
Likes: 0
From:
Default RE: need help removing deck!

Do I take it outta the black thing? or do I take the metal peice that goes into the black thing?
 
Reply



All times are GMT -4. The time now is 08:03 AM.