How to adjust projection headlights?
#1
05-24-2007 | 08:16 AM
Thread Starter
Joined: May 2007
Posts: 8
Likes: 0
From:
#2
05-24-2007 | 02:49 PM
All Star
Joined: May 2005
Posts: 946
Likes: 1
From:
RE: How to adjust projection headlights?
When I got mine, the brights were fine but the lows needed to be raised.
The brights have 3 silver bolts about an inch and a half log.
The lows have 2 screws on the back of the light itself. If I remember right, they are on the bottom. So if you pull the bottom on both sides in the light will go down and visa versa. A little more on one side will go right/left.
They are a pita to adjust. You have to remove them, make an adjustment, put them back in many times.
The brights have 3 silver bolts about an inch and a half log.
The lows have 2 screws on the back of the light itself. If I remember right, they are on the bottom. So if you pull the bottom on both sides in the light will go down and visa versa. A little more on one side will go right/left.
They are a pita to adjust. You have to remove them, make an adjustment, put them back in many times.