Ok here it is.......
Wouldn't ya know it, its raining.
Hopefully I can get er done this weekend, I have to fly out to Dallas Monday.

[IMG]local://upfiles/59926/01F34269940049179D726F2834F486EB.jpg[/IMG]

[IMG]local://upfiles/59926/A9BC4A4E830D451F9D12BDE009ADC5F7.jpg[/IMG]

[IMG]local://upfiles/59926/6874D8F5F80A4F3F916F9D2B1B52B9F5.jpg[/IMG]

[IMG]local://upfiles/59926/13183EA6495B4E929E911DA06D10B650.jpg[/IMG]

[IMG]local://upfiles/59926/8CD309BF4F714177B523A7064BB2AE93.jpg[/IMG]

 

Good call! Good luck on the install - not hard..............

 

make sure to drill a 1/16th bleeder hole and place the bleeder hole at 12 o clock in the thermo stat housing

 

Nice background!

 

Roger that, will do.
I remember a mod thread that gave the specifics, but alas I didn't bookmark it.

 

Hehe I kinda leave that in on purpose now.

 

i love pictures! make sure to take more during install, and hurry!!!

 

Well since it was raining.
I was researching the t-stat mod and found out I really don't need to drill a bleed hole!

Bonus!

Found some really good info too boot. Yeah yeah I know its a car but its an 06 Hemi.

http://www.300cforums.com/forums/per...at-16rwhp.html

Gigitty Gigitty Gigitty!!!

 

the valve looks smaller than the stock unit. Is this really a 5.7 stat or one that will just happen to physically fit?

I have some research to offer if it doesn't work out for you.

 

Did not even notice the backgorund. Had to go back and look. Man, this is bad.