superchip only made a tuner for the 4.7 in 2002,sorry man,not sure who makes one for newer 4.7

 

Nasty, check out the new sct tunner, it blows superchips right out the water. It fits 02-06 4.7s.

 

thanks i'll check it out,your y-pipe did it bolt right up or was thier some fab work to be done

 

Nothing to major, just cut old one out and weld new one on.

 

hmmmmmmm,bolted right up to the headers

 

You dont need to go that far up. Just like this one is enough.
http://cgi.ebay.com/ebaymotors/3-inc...QQcmdZViewItem

 

oh okay,i'm looking to go 3' right from the headers back,romur has it that is wear the 4.7 needs help

 

I heard its from right after the y-pipe like mine is, andeverything else is 3". And it there is an improvement over the stock setup. Iknow the 06 4.7Rams have the same setup from the factory too.
When my y-pipe was done it look like it would be a tight squeeze for a 3" piping to go after the header.
But if you go that route let me know what you think.

 

I have an 05 and I was told that there was no chip/programer for th 05 model. If anyone knows of differently please let me know. I am wanting to get the 6.1 cams but without the porgramer i hear it is worthless. If yall got some input i wouls appreciate it.

 

They just came out with a porgammer for04 and upyears, its kinda pricey though. Check on krc performance for more info. The 6.1 cams are for the hemi, you were probably referring about the 206 cams from krc.

http://www.krcperformance.com/