part of the week NEW PART 10/12
#44
RE: part of the week NEW PART 9/27
The secondset of picturesis clearly a fine splineR2D2 BUTT Dyno Adapter Flange.
Used exclusively in the now infamous Redneck DecisiveBUTT Dyno. Where as the "2s" denote Model and Version. i.e. R2D2.
The two off set holes give it away.
Note:
Even though the adapter flanges are interchangeable the
BUTT (Built-in User Torque Test) Dyno
Should not to be confused with the
*** (Accumulated System Senses) Dyno
Both of which replaced the older Keister Dyno
Used exclusively in the now infamous Redneck DecisiveBUTT Dyno. Where as the "2s" denote Model and Version. i.e. R2D2.
The two off set holes give it away.
Note:
Even though the adapter flanges are interchangeable the
BUTT (Built-in User Torque Test) Dyno
Should not to be confused with the
*** (Accumulated System Senses) Dyno
Both of which replaced the older Keister Dyno
#45
RE: part of the week NEW PART 9/27
New part! what is this??? I know that it is on all cars and thats it. That skinny cylinder protruding out of it on its side will go in and is spring loaded.
[IMG]local://upfiles/68704/85F65ECAD44A4F759F6CBB9826E33FBE.jpg[/IMG]
[IMG]local://upfiles/68704/A063ABA2FF864614BA4EEB3149676561.jpg[/IMG]
[IMG]local://upfiles/68704/A98554C6A238468CBC515577DF9B4D32.jpg[/IMG]
[IMG]local://upfiles/68704/65FF875C3BAB46788C1186E5BAF6C333.jpg[/IMG]
[IMG]local://upfiles/68704/3453F59CB70A49D58A58FC21B001CB57.jpg[/IMG]
[IMG]local://upfiles/68704/85F65ECAD44A4F759F6CBB9826E33FBE.jpg[/IMG]
[IMG]local://upfiles/68704/A063ABA2FF864614BA4EEB3149676561.jpg[/IMG]
[IMG]local://upfiles/68704/A98554C6A238468CBC515577DF9B4D32.jpg[/IMG]
[IMG]local://upfiles/68704/65FF875C3BAB46788C1186E5BAF6C333.jpg[/IMG]
[IMG]local://upfiles/68704/3453F59CB70A49D58A58FC21B001CB57.jpg[/IMG]
#46
#48
#49
RE: part of the week NEW PART 9/27
Thats not a car part at all..
It'sthebottomsideof aPlayboy Bunny keychain mold.
The single leg is the plastic injection fill hole and the two holes at the top of the ears are bleed outs.
The lower legand rough edges aretrimmed off after the casting is complete.
It'sthebottomsideof aPlayboy Bunny keychain mold.
The single leg is the plastic injection fill hole and the two holes at the top of the ears are bleed outs.
The lower legand rough edges aretrimmed off after the casting is complete.