SRT-10 push button install
#11
RE: SRT-10 push button install
it's way easy....didn't come with instructions since the button came from a SRT-10 that was gonna get crushed lol....the way i did it is i got power from the Cig liter and then ran another wire to the Yellow Ign wire coming from the Stg Column. The Ign wire goes to pin 1 and the power goes to pin 5 and thats it...turn the key to run, push and hold the button for just a real quick sec and it fires right up...you can still use the key to start it as well
#15
#17
#18
RE: SRT-10 push button install
ok finally got a few pics...went to take some pics like 4 hrs ago and damned camera was dead....but anyways, cam didnt wanna focus in one of the pics so it's a lil fuzzy. but it shouldn do the trick...and i kinda screwed up the trim peice because the trim piece hole wasnt big enough for the button so i had to use a dremel to open the hole up and got a lil carried away with one spot lol
[IMG]local://upfiles/20353/ACC53374D0B9453FB3ACC821C2FB7C7D.jpg[/IMG]
[IMG]local://upfiles/20353/7DC4E892672F483EAF228C7C3C7FBEC0.jpg[/IMG]
[IMG]local://upfiles/20353/928D22F289724C3BB5EC13D1ED2CD294.jpg[/IMG]
[IMG]local://upfiles/20353/ACC53374D0B9453FB3ACC821C2FB7C7D.jpg[/IMG]
[IMG]local://upfiles/20353/7DC4E892672F483EAF228C7C3C7FBEC0.jpg[/IMG]
[IMG]local://upfiles/20353/928D22F289724C3BB5EC13D1ED2CD294.jpg[/IMG]
#20