When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
k becuSE you'll want to drive with both on becuase the headlights will now point up a little so the foglights will kinda of bring light down. Unless you adjust ur headlights.
Put the truck on a level surface, measure the distance from the top of the tire to the top of the wheel well on both sides. Jack it up so the tires are just off the ground. Crank the bolts a few times, then lower the truck to see where you are at. You may have to raise/lower the truck a couple of times. Shoot for 2" of lift, there the truck would be perfectly level and don't be surprised if one side needs to be cranked more than the other for the same 2". If you keep it at 2" and no more, your ride won't be quite as harsh as if you tried to take it higher. You also may be able to get by a while on the stock shocks at that height.
Get an alignment done ASAP and you are home free...