Ebay special anyone??
#11
RE: Ebay special anyone??
I did a Ebay intake back when I got back from OIF 3 and I noticed the difference right away in sound and mileage. I did end up making some aluminum brakets to support it on the right side of the engine. I sometimes wish I had gone with the style that snakes down the fenderhere is a few things I did find out afterwards. Not to rip off AiRam, but I'm building a scoop for the front right and a heat shield too. I took out the plastic insert in the lower part of the bumper to put a cold air deflecter there too. I have some expanded metal mesh to fill in the gap afterwards there were a couple hitches but nothing a creative guy/gal couldn't do to fix it. I did hate the sensor hole was on the wrong side of the tube so my wires were a little on the stretched side. I may redrill to the other side and fill in the old hole. I still having problems uploading pictures to show it off. It does have a K&N cone style airfilter
I think mine was from chrom intakes It was off of Ebay, I just looked it over before I mounted it and made it work with no problems so far. If you look at the latest ebay intake posting on the forum you can see and read what I did to mount it up. There is this stretch rubber tape that you can get from Lowe's or Home Depot in the electrical section that I wrapped around the outside of the throttle body because the coupler is a few mm to big so when you go to tighten the hose clamp its loose. Also I made a support piece out of aluminum stock to hold it up in the middle on the center connector. I think you can get what I did by checking out the picturs I posted too. Hope this help, I definetly hear, see and feal the difference.
Stay Cool, H-
I think mine was from chrom intakes It was off of Ebay, I just looked it over before I mounted it and made it work with no problems so far. If you look at the latest ebay intake posting on the forum you can see and read what I did to mount it up. There is this stretch rubber tape that you can get from Lowe's or Home Depot in the electrical section that I wrapped around the outside of the throttle body because the coupler is a few mm to big so when you go to tighten the hose clamp its loose. Also I made a support piece out of aluminum stock to hold it up in the middle on the center connector. I think you can get what I did by checking out the picturs I posted too. Hope this help, I definetly hear, see and feal the difference.
Stay Cool, H-
#12
#15
RE: Ebay special anyone??
"yea i like what ur are saying about the ram air affect. i was thinking about buying some plastic tubing/ducting and possibly taking out my right fog light to get that ram air affect."
was thinking the same thing, I don't have fogs so it'd be easier, but thought a 90 degree PVC right after the opening, a straight shot up from that, could point it right at the air box?? Or would the air box need to come off?
was thinking the same thing, I don't have fogs so it'd be easier, but thought a 90 degree PVC right after the opening, a straight shot up from that, could point it right at the air box?? Or would the air box need to come off?
#16
#17
RE: Ebay special anyone??
I had planned to buy a expensive cai, but money has been getting hard to come by.lol
So I have been looking at Ebay. I found this one with a K&N filter.
http://cgi.ebay.com/ebaymotors/ws/eB...23868&rd=1
Looks to me like it should be just as good as the 77 series K&N and save me some money. What do you think?
So I have been looking at Ebay. I found this one with a K&N filter.
http://cgi.ebay.com/ebaymotors/ws/eB...23868&rd=1
Looks to me like it should be just as good as the 77 series K&N and save me some money. What do you think?
#18