differential locker
Does anyone run these?
http://store.summitracing.com/partde...p;autoview=sku
http://store.summitracing.com/partde...p;autoview=sku
http://store.summitracing.com/partde...p;autoview=sku
http://store.summitracing.com/partde...p;autoview=sku
I havent used this brand, but they sound good from the description. And Summit doesnt normally sell junk. I have never had an issue with quality from Summit. You can always research the company or contact Summits tech assist for further info. Are you planning a gear swap also?
I just did a little research out of curiosity. These units are made by Richmond gear. I would bet on them being high quality units.
http://www.powertrax.com/
http://www.powertrax.com/
I remember reading on another forum someone had bad problems with the Powertrax's on a 2wd Hemi. Can't remember who, or on what forum, but I remember they kept "locking up" on him driving on the open road and almost caused him an accident. Had a 2nd set warranteed in, and had the same problem.
When I get a chance, I'll do some searching and find out who/where it was...
When I get a chance, I'll do some searching and find out who/where it was...
The auburn and the detroit truetrac seem to be the lsd's of choice. From what I understand, you might get a little more durability out of the truetrac, but it is also more expensive. Also, if I remember correctly, one is a bit more harsh and the other is more forgiving. They are also different designs (auburn is clutch packs?). As you can tell I'm basing this off of memory, so research them both and you should find one you like.
Trending Topics
i would get a detroit trutrac..i have adetroit locker in my wrangler but for the rear an LSD would be better.. just my .02
http://www.4wheelparts.com/PDT263613.aspx
http://www.4wheelparts.com/PDT263613.aspx
ORIGINAL: Horseapples
I just did a little research out of curiosity. These units are made by Richmond gear. I would bet on them being high quality units.
http://www.powertrax.com/
I just did a little research out of curiosity. These units are made by Richmond gear. I would bet on them being high quality units.
http://www.powertrax.com/
http://moesperformance.com/index.php...88b2980fb6510e
ORIGINAL: Horseapples
Of corse, I could be wrong! The Auburn unit is pretty cheap, it would be a good buy.
http://moesperformance.com/index.php...88b2980fb6510e
ORIGINAL: Horseapples
I just did a little research out of curiosity. These units are made by Richmond gear. I would bet on them being high quality units.
http://www.powertrax.com/
I just did a little research out of curiosity. These units are made by Richmond gear. I would bet on them being high quality units.
http://www.powertrax.com/
http://moesperformance.com/index.php...88b2980fb6510e
would this work with my 4.56 gears. And how in depth of an Install would this be?



