Air Box Mod
#13
RE: Air Box Mod
if you want to cheap it out..you can go 4" pvc like i did...then when I had the funding, I "wasted" $300+ on the ramhammer...and I'm one of the few na qc's runnin 13's because of it...some may think it's a waste but I'll takem every single time cuz the low-end throttle response is amazing...
[IMG]local://upfiles/13436/1754A5E8B87041AB895FA3D1697BC08B.jpg[/IMG]
[IMG]local://upfiles/13436/955CF4792B1F4D96818345AB562CAE5D.jpg[/IMG]
[IMG]local://upfiles/13436/1754A5E8B87041AB895FA3D1697BC08B.jpg[/IMG]
[IMG]local://upfiles/13436/955CF4792B1F4D96818345AB562CAE5D.jpg[/IMG]
#15
Trying to modify the air box by
'Eyeball'
is a
Fool's Errand.
Does the air in your intake
flow smoothly like water in a garden hose
or pulse like machine gun muzzle blast?
How a former high school teacher in Australia
who became a self taught engineer & automotive journalist
successfully tested many air intakes for restriction
then slightly improved
the lowest restriction factory air intake yet measured:
http://www.autospeed.com/cms/A_109217/article.html
follow Julian Edgar's example
if you want to mod an air intake
'Eyeball'
is a
Fool's Errand.
Does the air in your intake
flow smoothly like water in a garden hose
or pulse like machine gun muzzle blast?
How a former high school teacher in Australia
who became a self taught engineer & automotive journalist
successfully tested many air intakes for restriction
then slightly improved
the lowest restriction factory air intake yet measured:
http://www.autospeed.com/cms/A_109217/article.html
follow Julian Edgar's example
if you want to mod an air intake
#17
No remove that pvc from your intake i know all about that...that pvc when it gets hott it makes moisture and it could blow that motor thats has happend to me you might want to look in the t/b an make sure there is no yellow **** in there im just trying to look out for the fellow dodge truck owner
#18
#19
#20