3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2005 Dodge Truck

Thread Tools
 
Search this Thread
 
Old Jul 20, 2008 | 02:48 PM
  #1  
Davidlon's Avatar
Davidlon
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 6
Likes: 0
Default 2005 Dodge Truck

My AC blows cold air out the drivers side of the truck, but hot out of passengers side. I think the heater and the ac is both blowing together. Thanks
 
Reply
Old Jul 29, 2008 | 05:38 PM
  #2  
Davidlon's Avatar
Davidlon
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 6
Likes: 0
Default RE: 2005 Dodge Truck

Nobody knows anything about this problem ?
 
Reply
Old Jul 29, 2008 | 05:42 PM
  #3  
HammerZ71's Avatar
HammerZ71
Administrator
Joined: Jul 2007
Posts: 24,686
Likes: 21
From: South Georgia/East Florida
Default RE: 2005 Dodge Truck

Blend/Recirc door is broken on the passenger side. About a $40 part, about $750 in labor because the entire dash has to be removed. Known Chrysler issue, I had to replace both in my '02 Grand Cherokee. Your covered if your still under your 3/36 bumper to bumper...
 
Reply
Old Jul 30, 2008 | 01:29 PM
  #4  
WhiteRam's Avatar
WhiteRam
Professional
Joined: Feb 2006
Posts: 100
Likes: 0
From: CNY
Default RE: 2005 Dodge Truck

'Zactly what mine was doing.... heater/cooler door, only had defrost till they fixed it!
 
Reply
Old Aug 2, 2008 | 10:23 AM
  #5  
Davidlon's Avatar
Davidlon
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 6
Likes: 0
Default RE: 2005 Dodge Truck

I have heat and cool at the same time. The only door I have found is closed. I have noticed that the ac when turned to regular ac and the super ac is the same. The fan does not blow any harder on the higher setting.Does anyone know where I can get a picture of the problem or a schematic ? Thanks
 
Reply
Old Aug 5, 2008 | 07:35 PM
  #6  
Davidlon's Avatar
Davidlon
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 6
Likes: 0
Default

Anyone ?
 
Reply
Old Aug 6, 2008 | 09:06 PM
  #7  
Davidlon's Avatar
Davidlon
Thread Starter
|
Junior Member
Joined: Jul 2008
Posts: 6
Likes: 0
Default

Bump can anyone help
 
Reply
Old Aug 6, 2008 | 10:09 PM
  #8  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

You will need to find a factory service manual.
 
Reply




All times are GMT -4. The time now is 05:54 AM.