3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

This is the setup I want. Will it work?

Thread Tools
 
Search this Thread
 
  #1  
Old 12-08-2008, 09:42 PM
caliboy@heart's Avatar
caliboy@heart
caliboy@heart is offline
Veteran
Thread Starter
Join Date: Jan 2008
Location: Maryland
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default This is the setup I want. Will it work?

I am in desperate need of new tires as my stock (came on the 04 Ram off the lot) Goodyear Wranglers after 34K miles are done. With the addition of my twin boys 4 months ago a lift is out of the questions as is new wheels. So, I have the off road pkg, my Ram came with the same wheels that the 2nd gen had......the 17xsomething (i think 7) wheels that have 5 spokes and the two little "nubs" or bumps between each spoke. I have searched and read a million posts but would like a clear and direct answer so I will just get on with it.

I have an 04 Ram QC 1500 4X4 Off Road Pkg and I want to get a TGC 2.5 inch leveling kit and Nitto Terra Graplers in 285/70/17. I am pretty sure this setup will work. Will I have any rubbing issues without using adapters and will the truck look funny with the 285's? Thank you all for the help.
 
  #2  
Old 12-08-2008, 10:33 PM
nim81's Avatar
nim81
nim81 is offline
Record Breaker
Join Date: Nov 2006
Location: fredericktown
Posts: 2,400
Likes: 0
Received 3 Likes on 3 Posts
Default

i have a 2002 qc sport 4x4, all i did was crank my t-bars, put 285/70 r17s bridgstone dueler revo's on it and no rubbing at all what-so-ever. looks great to me, just wish i had bigger tires still. im used to 35's on a ram.
 
  #3  
Old 12-08-2008, 10:36 PM
nim81's Avatar
nim81
nim81 is offline
Record Breaker
Join Date: Nov 2006
Location: fredericktown
Posts: 2,400
Likes: 0
Received 3 Likes on 3 Posts
Default

here is a pic with the revos

Name:  112408_085600.jpg
Views: 21
Size:  79.1 KB
 
  #4  
Old 12-09-2008, 08:52 AM
caliboy@heart's Avatar
caliboy@heart
caliboy@heart is offline
Veteran
Thread Starter
Join Date: Jan 2008
Location: Maryland
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by nim81
here is a pic with the revos

thanks for the replies. those wheels arent the ones i have. these are the ones i have:

http://www.detroitwheelandtire.com/p...2001&model=634

its kind of funny because when i searched detroit wheel and tire for a 2004 Ram they didnt come up however when i searched for an earlier year they did come up. i bought the truck with them on the truck and there were two others what had them as well when i bought it new back in 04. would i be able to fit 295's on these 17x8's without rubbing?
 
  #5  
Old 12-11-2008, 08:24 AM
caliboy@heart's Avatar
caliboy@heart
caliboy@heart is offline
Veteran
Thread Starter
Join Date: Jan 2008
Location: Maryland
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

morning bump
 
  #6  
Old 12-11-2008, 04:28 PM
nim81's Avatar
nim81
nim81 is offline
Record Breaker
Join Date: Nov 2006
Location: fredericktown
Posts: 2,400
Likes: 0
Received 3 Likes on 3 Posts
Default

i dont think you will have a problem, ive heard people putting 305's on stock with out problems but im not 100% sure
 
  #7  
Old 12-11-2008, 08:23 PM
draco8494's Avatar
draco8494
draco8494 is offline
Captain
Join Date: May 2008
Location: Inverness
Posts: 731
Likes: 0
Received 0 Likes on 0 Posts
Default

yeah x2 on the T-bar crank and you should be fine with 285's and even 295's will look alot better also filling out the entire wheel well too, i had 325x70xR17 on mine stock but i have a 2500...you will like the nitto's they ride nice and pretty good off road considering
 
  #8  
Old 12-11-2008, 10:04 PM
Ridinhigh's Avatar
Ridinhigh
Ridinhigh is offline
All Star
Join Date: Oct 2008
Location: Springfield, MO
Posts: 894
Likes: 0
Received 1 Like on 1 Post
Default

i dont have a tors lift and i am running 285/70r17 without a single problem of rubbing so you can save the money if you want on the lvling kit but those nitto's are great tires i will be getting a set after the BFG crap tires and hopefully get the 35"ers but you will have no problem with vlearance
 
  #9  
Old 12-11-2008, 10:11 PM
CreativeOffroad's Avatar
CreativeOffroad
CreativeOffroad is offline
Captain
Join Date: Dec 2008
Location: Orange County
Posts: 578
Likes: 0
Received 0 Likes on 0 Posts
Default

285's will fit no problem. I have the Nitto Terra Grapplers in that size and there's no rubbing at all. You might even consider going up to 295's, if that's doable with your budget of course.

Good luck.
 
  #10  
Old 12-14-2008, 11:19 AM
caliboy@heart's Avatar
caliboy@heart
caliboy@heart is offline
Veteran
Thread Starter
Join Date: Jan 2008
Location: Maryland
Posts: 385
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by CreativeOffroad
285's will fit no problem. I have the Nitto Terra Grapplers in that size and there's no rubbing at all. You might even consider going up to 295's, if that's doable with your budget of course.

Good luck.


will i have any rubbing when turning sharp with the 295's?
 


Quick Reply: This is the setup I want. Will it work?



All times are GMT -4. The time now is 01:42 PM.