PowerWire
Banned
Joined: Sep 2005
Posts: 7,759
Likes: 1
If you are talking about monitoring the IAT to see how much your resistor is changing the reading, then yes you can do that with the SC datalogging.
Banned
Joined: Nov 2008
Posts: 518
Likes: 0
From: Norfolk,Va
Why would you want to turn it off? Is there a reason you'd want less power?
Cold weather is not an issue with the resistor mod. There's a temperature floor at which it no longer affects the fuel / timing. Mine is permanently installed in conjunction with the Superchips 91 tune (93 octane gas here).
Cold weather is not an issue with the resistor mod. There's a temperature floor at which it no longer affects the fuel / timing. Mine is permanently installed in conjunction with the Superchips 91 tune (93 octane gas here).
Banned
Joined: Nov 2008
Posts: 518
Likes: 0
From: Norfolk,Va
Here is a link to the resistor that is needed. They are cheap as hell and the mod is very easy...
http://www.radioshack.com/product/in...ductId=2062346
http://www.radioshack.com/product/in...ductId=2062346
Record Breaker
Joined: Oct 2008
Posts: 1,394
Likes: 0
From: Bakersfied, CA
Before I posted the link to the Dak discussion, I emailed the guy who was building the wires for everybody. I asked him if I would see greater improvement over my airram power wire, if i installed his. he didnt answer.
So I will ask you guys, what'da think? Also, can i take the power wire out of my truck right now, put in this other resistor, and make it work if i believe there might greater power gains? (granted power gains are going to be minimal... i know)
So I will ask you guys, what'da think? Also, can i take the power wire out of my truck right now, put in this other resistor, and make it work if i believe there might greater power gains? (granted power gains are going to be minimal... i know)
Banned
Joined: Nov 2008
Posts: 518
Likes: 0
From: Norfolk,Va
Before I posted the link to the Dak discussion, I emailed the guy who was building the wires for everybody. I asked him if I would see greater improvement over my airram power wire, if i installed his. he didnt answer.
So I will ask you guys, what'da think? Also, can i take the power wire out of my truck right now, put in this other resistor, and make it work if i believe there might greater power gains? (granted power gains are going to be minimal... i know)
So I will ask you guys, what'da think? Also, can i take the power wire out of my truck right now, put in this other resistor, and make it work if i believe there might greater power gains? (granted power gains are going to be minimal... i know)
