When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
well i got the cel cuz i was idling the cam at 550 then bumped it up to 650 and now i have a race tune of 1000 for at the track with no torque management and all my timing is up top if you ran this tune on the street it would fry the tranny for sure
the cam lope is to severe for the computer to compensate for its just natural to wicked of a cam it was throwing the cel p0300 which is a misfire code from idling to low
bump up the idle and it takes care of the code
truck runs like a beast my sct tuner from krc performance are working on making it a lower idle
this ported throttle body with no torque management have caused my 1/4 throttle driving to my torque converter meaning when i hit 1/4 throttle my torque converter flashes at 3000
I see, this is why Dodge should use MAF like everyone else. Speed Density is so outdated for a daily driver. OK if you drive around with a laptop and heavy mods