When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
my buddy was talking about going to autozone and getting some pieces to do a custom intake any views on that?
i say go ahead and do it. u can go ahead and get just as good a quality. the intake accessories/pieces they sell are actually "spectre" brand....so if u go ahead and buy a "spectre" setup online, i pretty much feel you're getting what your buddy is talking about, but the pieces are preselected.
WOW thanks to all for the help!! chambers it says its for a V8 '04 will that really fit, my buddy was talking about going to autozone and getting some pieces to do a custom intake any views on that? and the link for the shirt dosent work for me
It will fit, the spectre I got was for the hemi so I had to get a different coupler to make it match up w/ my TB. The one I linked to should match up to your TB no problem, and at worst you may need to buy a coupler from home depot for $5 to make it work. I would recommend getting an intake which is 1 piece of pipe as there are less places/couplers for it to leak, and since they are mandrel bent it will also give smoother air flow.
yes i plan on it after getting a few after market parts, i kinda want to stick with the same horizontal type setup as a stock one but set up as the charger if i can find one, do you have any places that i can go to look for one?