did you get walked on my a SRT-8? and yeah, dremel & sawzall too!

 

Alright guys I think I am going to end up lowering the truck, not as low as some of you guys though.

Anyways this is the stance I want the truck to have after its all said and done, maybe an inch taller front and back though:



Its not slammed and it appears to still have a little rake to it which is what I like, and with it slightly taller that the one in the pic I should still have enough clearance to head up camping as well..... Now, what all do I need to give my truck that stance?

 

ot, but ive seen that truck in person its badass

 

you'd prolly need a 2/4 drop kit, and just not adjust the rear to the lower setting.

 

tuned you're going to have to explain that one to me a little more, what do you mean by not adjusting the rear to the lower setting?

 

you got two holes in the rear shackles just keep it in the high one... that will look great truckin and like ken said a 2/4 is what your looking for what i shoulda done....and still might.....no getting smoked by a srt 8 i said damn str8 straight.....i dont know if it was a srt 10 or not i wasnt in a good spot to run with him h had a whole open lane and just took off....if your talkin about the nightrunner....

 

usually when you get a rear flip kit it comes with shackles that are longer, but have 2 or 3 settings. so you can adjust from 2'' 4'' and 6'' of drop in the rear. (some have 2 settings, some have 3) anyways, when you install the shackles, just set it on the highest setting as to reduce the amount of drop you install. for exapmle: if you have 3 holes, top one being 2'' drop from factory, and the bottom one being 6'' drop... youd wanna install the leaf spring end on the top one to get a 2'' drop... from factory

 

oh true... damn str8. gay lol jk

 

I thought that if you did a rear flip kit that it automatically drops the rear x amount, so would it be 2" beyond that point or would it just be a 2" rear drop?

 

well a flip automaticly gives you a 4" drop period the lowest you can go with out a flip is the 2" drop shackles and o/l leaf delete unless you do something really ghetto and i know you wouldnt do that....but on the shckles in the flip kit you could go lower if you wish to providing it has slots for it.... but a 2/4 drop is nice and would give a grat stance mike oklahemi has a 3/5 on his....so you 'd be a lil higher.....the shackles may allow for you to be at a 2" drop with the axle flipped if the shackles are longer....had to reiterate...sorry