3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Help on a noise I hear!!!

Thread Tools
 
Search this Thread
 
Old Oct 19, 2009 | 12:27 PM
  #1  
02dodgeram5.9's Avatar
02dodgeram5.9
Thread Starter
|
Professional
Joined: Sep 2008
Posts: 185
Likes: 0
From: Wauseon, Ohio
Default Help on a noise I hear!!!

Got this noise in the front of my truck that i can feel under me sounding like it is on the drivers side. The sound is like a grinding type noise that gets its loudest around 35-45 mph..but it goes with the rotation of the tire. Thought it could possibly be the bearings goin bad but i jacked up the truck and shook my tires and i dont have much if any movement at all..so i thought well maybe those were okay then i thought maybe u-joints but driveshaft is stiff and so i just dont know what it could be..is there another way of checking to see if it could be the bearings..it almost sounds like it is a bearing problem..also just put a leveling kit and new shocks on and thought that could be the problem but it isnt..so if you guys have any ideas that I could check that would be greatly appreciated..the noise keeps getting worse as i drive it and dont want the wheel to fall off while drivin..thanks
 
Reply
Old Oct 19, 2009 | 01:16 PM
  #2  
cheapbeater's Avatar
cheapbeater
Record Breaker
Joined: Feb 2009
Posts: 1,550
Likes: 2
From: Wisconsin Rapids, WI
Default

did you get an alignment after the level? if so, maybe the alignment is a little out of wack and the tires are running funny down the road
if not, get one
 
Reply
Old Oct 19, 2009 | 01:44 PM
  #3  
02dodgeram5.9's Avatar
02dodgeram5.9
Thread Starter
|
Professional
Joined: Sep 2008
Posts: 185
Likes: 0
From: Wauseon, Ohio
Default

Yes i got the alignment the next day after my install of the level and shocks so I knew that wasnt the issue
 
Reply
Old Oct 19, 2009 | 02:16 PM
  #4  
Bluesmanjesse's Avatar
Bluesmanjesse
Record Breaker
Joined: Jun 2009
Posts: 1,266
Likes: 0
From: SW Ohio
Default

I have had a rock get stuck in between my rotor and that thin metal guard on the rotor and it sounds aweful,just a thought.
 
Reply
Old Oct 19, 2009 | 02:20 PM
  #5  
SMKNRAM's Avatar
SMKNRAM
Champion
Joined: May 2009
Posts: 3,186
Likes: 2
From: Sylva, NC
Default

sounds like brakes hanging up or wore out to me
 
Reply
Old Oct 19, 2009 | 03:41 PM
  #6  
BadHab1t's Avatar
BadHab1t
Grand Champion
Joined: Apr 2007
Posts: 5,930
Likes: 1
From: TAMPA BAY
Default

i too would have the brakes checked .....
 
Reply
Old Oct 19, 2009 | 05:35 PM
  #7  
lxman1's Avatar
lxman1
Site Moderator
15 Year Member
Photogenic
Photoriffic
Liked
Joined: May 2008
Posts: 9,657
Likes: 24
From: Louisville, Ky
Default

Mine did that then got louder. It was a bad hub bearing.
 
Reply
Old Oct 19, 2009 | 09:36 PM
  #8  
i-love-my-dodge's Avatar
i-love-my-dodge
Registered User
Joined: Mar 2009
Posts: 46
Likes: 0
From: Alberta Canada
Default

Did you take the drive shaft off to check the u-joints? if not then do so. Sounds like it could be a seized u joint, hence the no play.
 
Reply
Old Oct 19, 2009 | 10:36 PM
  #9  
02dodgeram5.9's Avatar
02dodgeram5.9
Thread Starter
|
Professional
Joined: Sep 2008
Posts: 185
Likes: 0
From: Wauseon, Ohio
Default

found out the noise is coming from the cv joint area..taking it to a mechanic tom and he is gonna put it on a lift and figure it ot further..looks like a bearing possibly off the passenger front drive axle. But thanks for all the suggestions..all those were somethin that was possible..wish i could fix this problem myself but i dont get into the drivetrain..so i will let someone else handle it..
 
Reply




All times are GMT -4. The time now is 05:55 PM.