Shaved Door Handles
#11
TIG is not too hot if the body guy is experienced with welding thin gauge metals. Its time consuming to weld a big then let it cool. Weld some more... It can be done pretty easy the hardest part is filling in the holes but keep in mind you will have a bunch more wiring to do and you would most likely need a new or an auxilary remote to open each door. Also because the truck has shaved door handles this opens it up for a theft opportunity because any some what auto oriented person know that on shaved vehicles there are emergency overrides to get it but once again some thing can be worked out I bet. Its not that I dont want you to shave the handle I just dont want you to be dissapointed when you have the system and it isnt what you wanted it to be.
#12
#13
If you havent already, get on your tube and watch the guys do the welding. All of them I have seen use MIG and tach 4 welds at a time and nothing more. They go 12-6-9-3 oclock to keep the panel cool and then tack weld some more. Some say you can use compressed air to cool it down faster. The filler plates you can make or buy for really cheap.
IMO, as long as you have an emergency cable to pull incase the battery goes dead or the solenoid craps out, I think you will be fine.
IMO, as long as you have an emergency cable to pull incase the battery goes dead or the solenoid craps out, I think you will be fine.
#14
#16
i thought about doing this mod too, but the idea of getting into an accident and the EMTs not being able to open my door was enough to make me just wanna paint the handles instead of shaving them. now if there was a kit to change the door handles to the flush-fit type of handles that alot of sports cars like the viper has then i'd be all over that one. clean & hidden but still functional and accessible
#17
#18
TIG is not too hot if the body guy is experienced with welding thin gauge metals. Its time consuming to weld a big then let it cool. Weld some more... It can be done pretty easy the hardest part is filling in the holes but keep in mind you will have a bunch more wiring to do and you would most likely need a new or an auxilary remote to open each door. Also because the truck has shaved door handles this opens it up for a theft opportunity because any some what auto oriented person know that on shaved vehicles there are emergency overrides to get it but once again some thing can be worked out I bet. Its not that I dont want you to shave the handle I just dont want you to be dissapointed when you have the system and it isnt what you wanted it to be.
#19
#20