Low end torque cams would be cams like the comp 260, HHP 260 or the Sidewinder. They are typically known to be the best torque cams to get the heavier trucks moving. Also, they all run on canned tunes which helps alleviate the cost associated with custom tuning that would be needed if you went with one of the bigger cams.

 

Inertia's Crazy Spartan will work on a canned tune also a Spartan on a 115/116 LSA should also work alright on a canned tune (thats the rout I was going to go)

 

Have you heard anything good about that cam? That is originally the route I was looking to go as well but I have yet to see anyone running that cam.

 

I have heard decent things about the "Crazy Jay" cam which works with a canned tune but I have not heard anyone running the "Crazy Spartan" cam which is a little more powerful than the Crazy Jay and works with a canned tune as well.

After talking with them a little while ago the Spartan on a high LSA (as close to stock as you can get) though should also run alright on a canned tune. You wont get as much of a peak on the power curve so it will look flatter and you wont be pulling the full potential out of it but according to the guys over there it should work.

 

http://www.inertiamotorsports.com/Crazy%20Jay.html

 

guys, dont worry about going too off topic with this. i love the info coming so far. keep it up.

 

The Crazy Jay is good and the truck will run well on it, but it is a pretty mild cam compared to what you will get out of the other cams that will run on a canned tune.

 

good video an info!

 

i just wanted to stop in with out any info on this and just say thank you for serving in the marine corp to help keep all us americans safe.....big up to you and all the fellow armed forces....THANK YOU.....and good luck with your mods good choices.....

 

Off topic? Inertia motorsports has cool t shirts. I bought a couple