When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I am happy my truck came equipped with the 3.92s but I would be even happier with the 4.10s. My truck still seems to find plenty of bog sessions with the 5-speed transmission.
hey guys, how do you know what gears you have, i would like to know what i have, is there somewhere on the truck i can look and find out. I have a 2002 quad cab 4x4 1500 slt, with the tow package, thanks for any info. i got a 6 inch lift and 35s and its doesnt seem to be to sluggish when it is accelerating or when i still pull my boat and enclosed trailer, so im thinkin i have the 3.92's but just wanted to see if i could find out
A sticker in the glove box, if it's gone, then there is also a tag on the rear axle. If you strike out there, you can always get on the Dodge Ram website and ask for a build sheet.
A sticker in the glove box, if it's gone, then there is also a tag on the rear axle. If you strike out there, you can always get on the Dodge Ram website and ask for a build sheet.
What he said. If not, then you can jack the @ss end up and watch the rotations between your drive shaft and tire. The ratio of how many times your tire completes a revolution versus your driveshaft will tell you what the numerical gear ratio is (close enough, anyway).