I have a 2006 1500 4x4, regular cab, longbed with airaid intake, flowmaster exhaust and throttle body spacer and with my tank filled up(34 gallons)I ran a 15.9 in the 1/4 mile. And I have posi, but my tires always spin because there's mothing inthe bed of my truck to keepthe tiresfrom spinning.

 

12.0's at about 122 Be in 11's next time out with better slicks.

05 srt-10
headers and exhaust
slicks
CAI and of course a very complex NO2 setup---over 5k in the nitrous system.

 

My best 1/8th mile is 10.126 @ 68.79 mph with a 2.30 60ft. This was with a 5 psi launch in 2wd (didnt want to grenade the tranny). This was against an '03 3500 SRW with a Quadzilla. He ran a 9.978 @ 71.40 mph with a 2.30 60 ft as well. I think he had 285's. Mods are in sig. I've got the Smarty on SW3 which is 60 hp plus timing. I'd like to see what I'd run with my stock tires on.

 

I'm curious about the gears yall are running ( 456, 329's) Not quit forsure what i have in my dodge( whatever stock is!) but i drive my ram on long trips from time to time but i also want to be able to go to the track or line up on the street from time to time. whats the best gears for me to go with. oh i have a quad cab 2wd

 

i took my stock4.7 dodge ram to the track yesterday i was thinking like 16.8 o 9 but it did a good 16.4 i think it i could go like to16.2 or what do u all think

 

'03 S/C CobraMe
+.0300 ------ Reaction-------+.5900
2.2902 ---------60ft--------- 2.2098
6.0950 -------300ft---------- 6.2889
8.6818 ---ET @ 594ft------- 9.0789
9.2570 ------1/8 ET--------- 9.6968
78.23 ------1/8 MPH------72.82

Mods are in sig.

 

My 06 4.7/5spd auto bone stock ran 16.7@80 mph.
It's a regular cab. My 60ft time is horrible 2.4.

 

MY 03 4.7 QC RAN 63.2 MPH AT 11.07 SECONDS IN THE 1/8TH MILE. FLOWMASTER'S AND AFTERMARKET INTAKE. ANY CHEAP IDEAS ON HOW TO GO A LITTLE FASTER?

 

My new best in my 04 QC is 13.89 @ 98.00 mph. The 1/8th was 8.87 @ 78.05 mph

 

I Envy you