3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Ram Dragstrip ETs

Thread Tools
 
Search this Thread
 
Old Apr 21, 2005 | 12:03 AM
  #1  
moparturd's Avatar
moparturd
Thread Starter
|
Banned
Joined: Jan 2004
Posts: 10,136
Likes: 1
From:
Default Ram Dragstrip ETs

Post em here. List your mods and engine please.

15.05 @ 89.23 MPH

04 Hemi RC 2wd
 
Reply
Old Apr 29, 2005 | 11:30 AM
  #2  
WingViper's Avatar
WingViper
All Star
Joined: Feb 2005
Posts: 804
Likes: 1
From: Washington, DC
Default RE: Ram Dragstrip ETs

Ok, it finally stopped raining on Thursdays. Last night was Test & Tune at Kilkare Speedway in Xenia, OH. I took out the Ram to have some fun for my first time. I started with 1/4 tank, by the end had 1/8. I only have a K&N FIPK as a mod. The slow increase in powerbraking was because I wasn't sure if my brakes would hold me back. I had powerbraked before on the streets and broken loose at like 1300 RPM's. For the type of truck, check my sig. I got 6 runs in and here's the finals.

Run #1 (Tow/Haul ON, NO Powerbraking, Tailgate up)
15.75 @ 85.73 mph

Run #2 (Tow/Haul ON, Powerbraking ~ 1200 RPM, Tailgate up)
15.92 @ 85.20 mph (I wrote this one off to having just driven home for long pants and coming back, so the engine was all heated up.)

Run #3 (Tow/Haul ON, Powerbraking ~ 1500 RPM, Tailgate up)
15.76 @ 85.53 mph

Run #4 (Tow/Haul OFF, Powerbraking ~ 1700 RPM, Tailgate down)
15.52 @ 85.86 mph

Run #5 (Tow/Haul OFF, Powerbraking ~ 2000 RPM, Tailgate down)
15.43 @ 86.40 mph

Run #6 (Tow/Haul OFF, Powerbraking ~ 2300 RPM, Tailgate down)
15.25 @ 87.01 mph
 
Reply
Old Apr 30, 2005 | 12:42 AM
  #3  
Hemi Justin's Avatar
Hemi Justin
Joined: Apr 2005
Posts: 46
Likes: 0
Default RE: Ram Dragstrip ETs

What was you're reaction time.Where you leaving on the last yellow.I've managed a 14.8 E.T 88 mph by cutting a good light
 
Reply
Old Apr 30, 2005 | 11:10 AM
  #4  
guido7's Avatar
guido7
Veteran
Joined: Mar 2005
Posts: 255
Likes: 0
From:
Default RE: Ram Dragstrip ETs

Viper, what rear gears do you have in your truck....????
I am concidering going to the farmington strip here, but I believe its a 1/8 mile.... but I have 456 gears......
Cant understand why you got better times with the tow/haul off......Todd, any thoughts on that???
 
Reply
Old Apr 30, 2005 | 11:20 AM
  #5  
moparturd's Avatar
moparturd
Thread Starter
|
Banned
Joined: Jan 2004
Posts: 10,136
Likes: 1
From:
Default RE: Ram Dragstrip ETs

The tow haul made uses the lower 2nd gear option and I think it holds gears longer, and doesn't go into 4th gear either or allow the converter to lock.

Those 4.56's are good for Farmington. At rockingham i ran a 9.47 ET.
 
Reply
Old May 1, 2005 | 03:20 AM
  #6  
ramfan5.9's Avatar
ramfan5.9
Hall Of Fame
Joined: Jun 2004
Posts: 12,484
Likes: 0
From: New Hampshire
Default RE: Ram Dragstrip ETs


ORIGINAL: Hemi Justin

What was you're reaction time.Where you leaving on the last yellow.I've managed a 14.8 E.T 88 mph by cutting a good light


reaction time will not affect ET

you can have a .500 reaction time or a 2.0 reaction time and you will still pull the same time
 
Reply
Old May 1, 2005 | 08:30 PM
  #7  
WingViper's Avatar
WingViper
All Star
Joined: Feb 2005
Posts: 804
Likes: 1
From: Washington, DC
Default RE: Ram Dragstrip ETs

Reaction times were all just under a second, I couldn't get the beast rolling that fast. I punched it at the 3rd yellow light but next time I may try the second. I have the 3.92's in the rear. I was getting faster as the night wore on, I just need to figure out when I can stop powerbraking and let the petal down. I tease my buddy alot cause he dragged his s/c 98 mustang and his worst time was a 14.99, right close to my best. I didn't know they made higher gears than the 3.92's, are they aftermarket? What benefits do you see from them?
 
Reply
Old May 16, 2005 | 06:12 PM
  #8  
WingViper's Avatar
WingViper
All Star
Joined: Feb 2005
Posts: 804
Likes: 1
From: Washington, DC
Default RE: Ram Dragstrip ETs

I'm hoping to hit the track again this Thursday, anybody got any suggestions? I was thinking about taking the tailgate OFF totally.
 
Reply
Old May 16, 2005 | 09:26 PM
  #9  
guido7's Avatar
guido7
Veteran
Joined: Mar 2005
Posts: 255
Likes: 0
From:
Default RE: Ram Dragstrip ETs

Tailgate off is good, I plan on going to The Farm soon and check out my 1/8th time... will let you all know when it happens....
Also my gears (456) were aftermarket by Richards, installed by a pro, not me, and feel real strong compared to other hemi's I have driven....
Some day I plan on going and seeing Todd and doing the Rock.... then we'll see what my mods so far have done......

Good luck Viper on your thursday runs...let us know............
 
Reply
Old May 17, 2005 | 06:03 PM
  #10  
Drew's Avatar
Drew
Professional
Joined: Aug 2004
Posts: 117
Likes: 1
From: 33.43.342, 84.21.602
Default RE: Ram Dragstrip ETs

it would be an option to pull it off, save some weight, but then again, the weight of the tail gate being in the back would add some traction to the rear wheels. but the weight might not be enough to see a gain.

but you never know.

I need to take both my truck to the track and see what they do. 5th in my ram (1:1) is a blast on the highway.

the Ram has 4.10's my yoda I'm unsure of but I think it may have something along the lines of a 3.55 or lower, not sure though
 
Reply



All times are GMT -4. The time now is 06:24 AM.