How to do a cam swap on a HEMI
#41
#42
Well you could always bring it down here and I could change it all for you. Ive got everything to do it and have done a more than a few. PM sent BTW. Anyone else who wants this tool please LMK.
If anyone is in the process or market to change a cam, you will need to change the valve springs also.
You can do this two ways, either on the block or off the block.
If you pull the heads to do it you need to replace the head bolts, head gaskets, intake gaskets and exhaust manifold gaskets.
Or you can use the tool I have to change the springs on the heads on the block and leave all of that mentioned above alone.
I have that tool for sale so if you are interested please let me know.
If anyone is in the process or market to change a cam, you will need to change the valve springs also.
You can do this two ways, either on the block or off the block.
If you pull the heads to do it you need to replace the head bolts, head gaskets, intake gaskets and exhaust manifold gaskets.
Or you can use the tool I have to change the springs on the heads on the block and leave all of that mentioned above alone.
I have that tool for sale so if you are interested please let me know.
#43
I Have a light tic- on the EGR side of my motor..I'm thinking it's probably a lifter not pumping up as tight as it should..So when I get into changing my cam and springs- I'm also going to switch to Roller lifters, Rockers and roller cam..This should eliminate the tap..My EGR is not hooked up..Does anyone know the Pro's- and - Cons, about the EGR, and what it might effect by completely doing away with it on my 2004 Motor....
Thanks....
Thanks....
#44
#46
#47
Hey Weed-I changed my oil from 5w-30 ..Synthetic to 5w-30, Valvaline and the tic went away..I'm guessing my Hemi don't like Synthetic oil OR the Wal-Mart synthetic oil isn't all it's supposed to be..Iv'e also noticed an increase in fuel economy..I don't know how oil had anything to do with that- but I was glad to see it..
#49
hi weed i live in easley sc. i dont know how close that would bee to you but iam getting the 6.1 cam & stuff when i get my tax money back in about 2 months. was wondering if i drove my rumble bee over there. could you help me do this ? this is first with cam swap.
would this summer bee good 2011. thanks joe
would this summer bee good 2011. thanks joe