When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Well looks like I am swimming up stream here but I would just polish what you have it would be a good match to your bumper not something on the other end of your truck. Take it or leave it but if it were mine I would just buff it up and it would look like chrome.
Well I'm gonna polish the sh*t out of them tomorrow and see how well they match the stainless grill guard. I'm going up there to make the grill and a piece for the hood scoop. I may buy a sheet of diamondplate and make another anyway, since this one is saved in the machine.
But if I'm gonna spend almost $80 on a sheet of diamondplate, then I'm gonna figure out other mods to make with the 2/3 of the sheet I don't use for this piece...
Well I'm gonna polish the sh*t out of them tomorrow and see how well they match the stainless grill guard. I'm going up there to make the grill and a piece for the hood scoop. I may buy a sheet of diamondplate and make another anyway, since this one is saved in the machine.
But if I'm gonna spend almost $80 on a sheet of diamondplate, then I'm gonna figure out other mods to make with the 2/3 of the sheet I don't use for this piece...
Okay well aslong as it ties in some how right? It should polish up nice being a fresh piece of metal and will match the stainless pretty damn close.
Ok, final look. All polished. If you look at the stainless cross bar above it, it's pretty darn close to matching the stainless steel although it's aluminum...