Finally took Pics of E-FAN AT3030 Install
#1
Finally took Pics of E-FAN AT3030 Install
I installed my e fan this weekend and my AT3030 over the summer just never took any pics. The exhaust is covered in salt and rust. I am going to redo the entire exhaust with stainless as soon as the weather is warmer here in MASS.I did remove the green A/C wire that I ran up the A/C line. I would like to machine new fan mounting brackets at work as soon as I have some extra time. The ones on there now look like crap but they work for now.
Last edited by mpk4580; 02-17-2010 at 05:27 PM.
#7
Trending Topics
#8
to answer the aero turbine question I love it. Everything is stock but the AT3030 and an 18" extension piece, clamps and hangers form autozone. After that is my stock tailpipe w/resonator. Sounds good not very loud but a good sound more throaty and no resonance in the cab. I plan on installing all stainless pipe and clamps and get rid of the stock set up all together.
About the E fan I cut the shroud in half, no turning back now I guess. This way I could use the stock tanks. I drilled a hole thru the shroud and the top of the radiator and screwed it in so the middle was fastened. Let me know if you want closer pics and I'll see what I can do.
About the E fan I cut the shroud in half, no turning back now I guess. This way I could use the stock tanks. I drilled a hole thru the shroud and the top of the radiator and screwed it in so the middle was fastened. Let me know if you want closer pics and I'll see what I can do.