When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3rd Gen Ram Tech2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
i had one that was pretty stuck , on my old Dakota i used a 2ft pipe wrench after you break the seal it should come pretty easy, or like the other guys said just slip a piece of pipe on the end of a pipe wrench to get the leverage
If you don't care about the ball and are just gonna toss it when you take it off then go with RH's pipe wrench and breaker bar solution. Have done it many times to remove an old rusty one that was destined for the garbage can...