3rd Gen Ram Tech 2002-2008 Rams: This section is for TECHNICAL discussions only, that involve the 2002 through 2008 Rams Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Ok exhaust help

Thread Tools
 
Search this Thread
 
  #1  
Old 07-25-2010, 03:55 AM
dratomic's Avatar
dratomic
dratomic is offline
Amateur
Thread Starter
Join Date: Jul 2010
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default Ok exhaust help

Ok im new here .. im getting an 05 ram with a 5.7 in it now for the exhaust i need a new y pipe cause the stock one is junk correct? And hows the drone in the cab with a at3030?? i read alot of posts about the at 3030 but alot of people say alot of differnt things about it no 1 straight answer. My 3 y/o daughter will be riding in this truck i dont want it to be to loud for her. Help me out thanks
 

Last edited by dratomic; 07-25-2010 at 03:59 AM.
  #2  
Old 07-25-2010, 12:01 PM
lxman1's Avatar
lxman1
lxman1 is offline
Site Moderator
Dodge Forum Moderator
Join Date: May 2008
Location: Louisville, Ky
Posts: 9,649
Received 21 Likes on 18 Posts
Default

You just need to replace the end of the factory Y pipe where the two go into one. Magnaflow makes a nice stainless one. I also prefer the Magnaflow muffler. If you have factory resonators then the at3030 may be ok, if not, the XL3030 will be a little quieter in the cab.
 
  #3  
Old 07-25-2010, 03:33 PM
dratomic's Avatar
dratomic
dratomic is offline
Amateur
Thread Starter
Join Date: Jul 2010
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
  #4  
Old 07-25-2010, 04:09 PM
HammerZ71's Avatar
HammerZ71
HammerZ71 is offline
Administrator
Dodge Forum Administrator
Join Date: Jul 2007
Location: South Georgia/East Florida
Posts: 24,686
Likes: 0
Received 20 Likes on 19 Posts
Default

Originally Posted by dratomic

That's the one...
 
  #5  
Old 07-25-2010, 10:33 PM
dratomic's Avatar
dratomic
dratomic is offline
Amateur
Thread Starter
Join Date: Jul 2010
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default

what size does the y have to be?
 



Quick Reply: Ok exhaust help



All times are GMT -4. The time now is 12:50 PM.