Where is the trailer brake harness?
#12
#13
Yeah, that made me mad. What a crappy design. I managed to get it plugged in without unplugging the big connector. Makes me want to find the engineer (or bean counter) responsible for that location and kick him in the jimmies as hard as I can...
#15
#17
#18
Here this was posted recently. Try this for ideas https://dodgeforum.com/forum/3rd-gen...placement.html
#19
Thanks all, I found it. Dad's truck is NOTHING like those pictures that were posted. The connector was on a 4" pigtail and was taped to the E-brake cable, thus why I couldn't find it. I saw the bolt that is referenced next to the OBD port, but I think that might be too far over. What was the right-side option?
Last edited by magnethead; 09-27-2010 at 08:59 PM.
#20
If you go back to the thread mention above I posted a pick of the placement I went with.
Damn, though, if I new there was a dang prewired plug, I could have done this myself...I paid $35 to have it done. Oh Well, they gave me the run down on using it, and had a box they connect to the 7pin to show everything works properly. I'd pay $20 for that service. Of course they are liable if it isn't wired right, so I'd pay $15 for that. I'm okay with it, I guess.
Damn, though, if I new there was a dang prewired plug, I could have done this myself...I paid $35 to have it done. Oh Well, they gave me the run down on using it, and had a box they connect to the 7pin to show everything works properly. I'd pay $20 for that service. Of course they are liable if it isn't wired right, so I'd pay $15 for that. I'm okay with it, I guess.